Amity Thermosets ATM 122 Phenolic Molding Organic Filler, Compression Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic
Manufacturer	Amity Thermosets
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Amity Thermosets ATM 122 Phenolic Molding Organic Filler, Compression Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Characteristics:Good mouldability Good mechanical strengthGood electrical insulationGood surface finishMedium thermal stabilityColor- black, brownSoft/medium flow Applications: Electric control panel parts Small electric meter covers & partsElectric accessories ( superior quality )Glossy handles & knobsToaster & electric appliance partsLamp holderToilet seatsCarbon brush holdersDecor items ( e.g. ash trays )Starter push buttonsSolenoid switch covers ( medium quality ) Kitchen equipment ( eg. mixer, dishwasher, ovens ) fittingsTerminal boards, etc.Information provided by Amity Thermosets Limited

Physical Properties	Metric	English	Comments
Density	1.38 - 1.41 g/cc	0.0499 - 0.0509 lb/in³	Molding; IS 867-1963
Apparent Bulk Density	0.620 - 0.680 g/cc	0.0224 - 0.0246 lb/in³	IS 867-1963
Water Absorption	0.40 - 0.60 %	0.40 - 0.60 %	IS 13411-1993
Linear Mold Shrinkage	0.0070 - 0.0086 cm/cm	0.0070 - 0.0086 in/in	IS 13411-1992

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	46.0 - 60.0 MPa	6670 - 8700 psi	5 mm/min.; IS 867-1963
Shear Strength	64.0 - 74.0 MPa	9280 - 10700 psi	2mm/min.; IS 867-1963
Izod Impact, Notched	0.280 - 0.420 J/cm	0.525 - 0.787 ft-lb/in	IS 13411-1992

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.2e+10 - 3.2e+11 ohm-cm	3.2e+10 - 3.2e+11 ohm-cm	IS 3396-1979
Surface Resistance	3.2e+9 - 3.2e+10 ohm	3.2e+9 - 3.2e+10 ohm	IS 3396-1979
Dielectric Strength	5.00 - 7.00 kV/mm @Temperature 90.0 °C	127 - 178 kV/in @Temperature 194 °F	IS 2584-1963

Processing Properties	Metric	English	Comments
Mold Temperature	160 - 180 °C	320 - 356 °F
Injection Pressure	15.68 - 34.3 MPa	2274 - 4970 psi	Mold Pressure
Cure Time	0.333 - 0.417 min	0.00556 - 0.00694 hour	per mm
Shelf Life	12.0 Month	12.0 Month	10-25°C

Users viewing this material also viewed the following: