Arlon 45561R007 0.007"(0.178 mm) Uncured Rubber with Fiberglass Substrate

Category	Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled
Manufacturer	Arlon
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon 45561R007 0.007"(0.178 mm) Uncured Rubber with Fiberglass Substrate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Design/Construction:Side 1: Uncured RubberSide 2: Uncured RubberAppearance: Red silicone gum on fiberglass fabricThis data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division

Physical Properties	Metric	English	Comments
Thickness	38.1 - 76.2 microns	1.50 - 3.00 mil	Side 1
	38.1 - 76.2 microns	1.50 - 3.00 mil	Side 2
	76.2 microns	3.00 mil	Polyethylene Interleave
	76.2 microns	3.00 mil	Prime Coated 113 Fiberglass, Substrate
	165 - 203 microns	6.50 - 8.00 mil	Overall

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	40 - 50	40 - 50	Compound Property
Tensile Strength	5.58 - 6.83 MPa	810 - 990 psi	Compound Property
Elongation at Break	540 - 660 %	540 - 660 %	Compound Property
Peel Strength	>= 0.877 kN/m	>= 5.00 pli	[ppi], Bond Strength

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	232 °C	450 °F
Minimum Service Temperature, Air	-56.7 °C	-70.0 °F

Electrical Properties	Metric	English	Comments
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in

Processing Properties	Metric	English	Comments
Cure Time	15.0 min @Temperature 177 °C	0.250 hour @Temperature 350 °F	Recommended Cure Cycle
	120 min @Temperature 232 °C	2.00 hour @Temperature 450 °F	Recommended Postcure Cycle
Shelf Life	6.00 Month @Temperature <=23.9 °C	6.00 Month @Temperature <=75.0 °F	From date of manufacture

Descriptive Properties	Value	Comments
Color	Red
Total Product Weight (oz/yd2)	9.25 - 10.25
Uncoated Fabric Break Strength	150 lb/in	Warp Direction, Substrate Property
	70 lb/in	Fill Direction, Substrate Property

Users viewing this material also viewed the following: