BASF Elastollan® 1160D Polyether Type Polyurethane Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade
Manufacturer	BASF
Trade Name	Elastollan®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Elastollan® 1160D Polyether Type Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Recommended for injection molding. Elastollan ® 1100 series products are FDA Sec. 177.2600 compliant. Elastollan 1100 series of products are polyether-based thermoplastic polyurethanes. They exhibit excellent low temperature properties, hydrolysis resistance and fungus resistance. These products can be injection and blow molded and extruded. As with all TPU products this grade must be dried prior to processing.Property values below are typical values based on test samples cured 20 hours at 100°C before testing. Information provided by BASF Corporation.

Physical Properties	Metric	English	Comments
Density	1.17 g/cc	0.0423 lb/in³	ASTM D792

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	60	60	ASTM D2240
Tensile Strength, Ultimate	40.0 MPa	5800 psi	ASTM D412
Tensile Strength, Yield	22.0 MPa @Strain 100 %	3190 psi @Strain 100 %	ASTM D-412
	33.0 MPa @Strain 300 %	4790 psi @Strain 300 %	ASTM D-412
Elongation at Break	415 %	415 %	ASTM D412
Tear Strength	205 kN/m	1170 pli	ASTM D624
Taber Abrasion, mg/1000 Cycles	50	50	H-18 wheel; ASTM D-1044.
Tensile Set	60 %	60 %	at break; ASTM D-412

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	>= 600 V	>= 600 V	DIN/IRC 112

Users viewing this material also viewed the following: