BASF Petra® 130 FR 30% Glass Filled PET

Category	Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) , Polyethylene Terephthalate (PET), Glass Fiber Filled, Flame Retardant
Manufacturer	BASF
Trade Name	Petra®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Petra® 130 FR 30% Glass Filled PET.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Petra 130 FR is a 30% glass fiber reinforced, flame retardant injection molding polyethylene terephthalate feedstocks. It is recognized as UL 94V-0/5VA by Underwriters Laboratories. It is also available in pigmented versions.

Physical Properties	Metric	English	Comments
Density	1.68 g/cc	0.0607 lb/in³	ISO 1183
Viscosity Measurement	0.49	0.49	Inherent Viscosity
Linear Mold Shrinkage	0.0030 cm/cm	0.0030 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	118	118	ASTM Test
Tensile Strength at Break	130 MPa	18900 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	130 MPa	18900 psi	5mm/min; ISO 527
Elongation at Break	2.0 %	2.0 %	5mm/min; ISO 527
	2.0 %	2.0 %	0.2 in/min; ASTM Test
Tensile Modulus	11.1 GPa	1610 ksi	1mm/min; ISO 527
Flexural Strength	210 MPa	30500 psi	ASTM Test
	85.0 MPa @Temperature 120 °C	12300 psi @Temperature 248 °F	ASTM Test
	275 MPa @Temperature -40.0 °C	39900 psi @Temperature -40.0 °F	ASTM Test
Flexural Modulus	9.70 GPa	1410 ksi	ASTM Test
	2.97 GPa @Temperature 120 °C	431 ksi @Temperature 248 °F	ASTM Test
Izod Impact, Notched	0.900 J/cm @Thickness 3.17 mm	1.69 ft-lb/in @Thickness 0.125 in	ASTM Test

Thermal Properties	Metric	English	Comments
CTE, linear	24.0 µm/m-°C @Temperature -30.0 - 30.0 °C	13.3 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	24.0 µm/m-°C	13.3 µin/in-°F	ASTM Test
Melting Point	245 °C	473 °F	10 K/min
	245 °C	473 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	240 °C	464 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	210 °C	410 °F	ISO 75
	220 °C	428 °F	ASTM Test
Flammability, UL94	V-0 @Thickness 0.300 mm	V-0 @Thickness 0.0118 in
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in
	5VA @Thickness 0.800 mm	5VA @Thickness 0.0315 in
Oxygen Index	36 %	36 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	3.6 @Frequency 1.00e+6 Hz	3.6 @Frequency 1.00e+6 Hz	IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	IEC 60250
Dielectric Strength	40.0 kV/mm	1020 kV/in	IEC 60243-1
Dissipation Factor	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250
	0.020 @Frequency 100 Hz	0.020 @Frequency 100 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	115 °C	239 °F	Injection molding
Injection Velocity	115 mm/sec	4.53 in/sec	Injection molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Flame retarding agent
UL.UL-C	Yes

Users viewing this material also viewed the following: