POLYMER SEARCH

BASF Ultramid® A34 01 PA66 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced, Flame Retardant
Manufacturer	BASF
Trade Name	Ultramid®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® A34 01 PA66 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultramid A34 01 is an intermediate visosity, PA66 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

Physical Properties	Metric	English	Comments
Density	1.13 g/cc	0.0408 lb/in³	ISO 1183
Water Absorption	8.5 %	8.5 %	ISO 62
Moisture Absorption at Equilibrium	2.2 %	2.2 %	23°C/50% R.H.; ISO 62
Relative Viscosity	3.5 cP	3.5 cP	ISO Test; 96 % SAV
Viscosity Test	205 cm³/g	205 cm³/g	Viscosity number
Linear Mold Shrinkage	0.014 cm/cm	0.014 in/in	ASTM Data; MD
Melt Flow	40 g/10 min @Load 5.00 kg, Temperature 275 °C	40 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	80.0 MPa	11600 psi	50mm/min; ISO 527
	80.0 MPa	11600 psi	2 in/min; ASTM Test
Elongation at Break	25 %	25 %	50mm/min, Nominal strain; ISO 527
	50 %	50 %	2 in/min; ASTM Test
Elongation at Yield	4.2 %	4.2 %	50mm/min; ISO 527
Tensile Modulus	3.20 GPa	464 ksi	1mm/min; ISO 527
	3.20 GPa	464 ksi	ASTM Test
Flexural Modulus	2.76 GPa	400 ksi	ASTM Test
Izod Impact, Notched	0.530 J/cm @Temperature -40.0 °C	0.993 ft-lb/in @Temperature -40.0 °F	ASTM Test
	0.640 J/cm @Thickness 3.17 mm	1.20 ft-lb/in @Thickness 0.125 in	ASTM Test
Charpy Impact Unnotched	NB	NB	ISO 179
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	NB	NB	ISO 179
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	40.0 µm/m-°C @Temperature -30.0 - 30.0 °C	22.2 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	85.0 µm/m-°C	47.2 µin/in-°F	ISO 11359
Melting Point	255 °C	491 °F	10 K/min
	260 °C	500 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	199 °C	390 °F	ASTM Test
	220 °C	428 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	ISO 75
	100 °C	212 °F	ASTM Test
Vicat Softening Point	250 °C	482 °F	(50 °C/h / 50N) - B/50; ISO 306
Flammability, UL94	V-2 @Thickness 1.57 mm	V-2 @Thickness 0.0618 in
	V-2 @Thickness 0.890 mm	V-2 @Thickness 0.0350 in
Oxygen Index	28 %	28 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	3.2 @Frequency 1.00e+6 Hz	3.2 @Frequency 1.00e+6 Hz	IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.0050 @Frequency 100 Hz	0.0050 @Frequency 100 Hz	IEC 60250
	0.026 @Frequency 1.00e+6 Hz	0.026 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	North America and Europe
FDA	21 CFR 177.1500
Form	Pellets
Impact Modified	No
Primary Processing Technique	Film Extrusion
Processing	Injection Molding
	Other Extrusion

Users viewing this material also viewed the following: