POLYMER SEARCH

BASF Ultrason S 6010 PSU

Category	Polymer , Thermoplastic , Polysulfone (PSU)
Manufacturer	BASF
Trade Name	Ultrason S
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultrason S 6010 PSU.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultrason S 6010 is an unreinforced, high molecular weight injection-molding and extrusion grade with excellent chemical resistance (stress crack resistance) and good solubility in typical solvents (N-Methylpyrrolidone, Dimethylacetamide, Dichlormethane) used e.g. in the production of membranes or coatings, with reduced oligomer content. It conforms to FDA requirements of 21 CFR 177.1655.

Physical Properties	Metric	English	Comments
Density	1.24 g/cc	0.0448 lb/in³	ISO 1183
Water Absorption	0.80 %	0.80 %	ISO 62
Moisture Absorption at Equilibrium	0.30 %	0.30 %	23°C/50% R.H.; ISO 62
Viscosity Test	81 cm³/g	81 cm³/g	Viscosity number
Linear Mold Shrinkage, Flow	0.0072 cm/cm	0.0072 in/in	ISO 294
Linear Mold Shrinkage, Transverse	0.0077 cm/cm	0.0077 in/in	ISO 294
Melt Flow	30 g/10 min @Load 10.0 kg, Temperature 360 °C	30 g/10 min @Load 22.0 lb, Temperature 680 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	135 MPa	19600 psi	ISO 2039-1
Tensile Strength at Break	75.0 MPa	10900 psi	5mm/min; ISO 527
Tensile Strength, Yield	75.0 MPa	10900 psi	50mm/min; ISO 527
Elongation at Break	5.7 %	5.7 %	5mm/min; ISO 527
Elongation at Yield	5.7 %	5.7 %	50mm/min; ISO 527
Tensile Modulus	2.60 GPa	377 ksi	ISO 527
Secant Modulus	0.0250 GPa @Temperature 200 °C	3.63 ksi @Temperature 392 °F	ISO 6721
	0.800 GPa @Temperature 175 °C	116 ksi @Temperature 347 °F	ISO 6721
	0.900 GPa @Temperature 100 °C	131 ksi @Temperature 212 °F	ISO 6721
	0.950 GPa @Temperature 50.0 °C	138 ksi @Temperature 122 °F	ISO 6721
Izod Impact, Notched (ISO)	6.00 kJ/m²	2.86 ft-lb/in²	ISO 180/A
	6.00 kJ/m² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	ISO 180/A
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	0.600 J/cm²	2.86 ft-lb/in²	ISO 179/1eA
	0.600 J/cm² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	2500 MPa	363000 psi	Elongation <0.5%, 23°C; ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	53.0 µm/m-°C @Temperature 23.0 - 80.0 °C	29.4 µin/in-°F @Temperature 73.4 - 176 °F
	60.0 µm/m-°C @Temperature 140 - 180 °C	33.3 µin/in-°F @Temperature 284 - 356 °F
Maximum Service Temperature, Air	180 °C	356 °F	short cycle operations
Deflection Temperature at 1.8 MPa (264 psi)	175 °C	347 °F	ISO 75-2
Glass Transition Temp, Tg	187 °C	369 °F	10 K/min; ISO 11357-1/-3

Optical Properties	Metric	English	Comments
Transmission, Visible	87 % @Thickness 2.00 mm	87 % @Thickness 0.0787 in	ASTM D 1003

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	IEC 60093
Dielectric Strength	37.0 kV/mm	940 kV/in	IEC 60243-1 3
Comparative Tracking Index	125 V	125 V	Test Liquid A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	330 - 390 °C	626 - 734 °F
Mold Temperature	120 - 160 °C	248 - 320 °F

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	North America and Europe
FDA	21 CFR 177.1655
Impact Modified	No
NSF Std. 61	Yes
Primary Processing Technique	Injection Molding and Extrusion

Users viewing this material also viewed the following: