Braskem Flexus® 9210 LLDPE Blown Film Extrusion (discontinued **)

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Film Grade
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Braskem Flexus® 9210 LLDPE Blown Film Extrusion (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

25µm film gauge, obtained in 40mm extruder, with blow up ratio 2, 2:1Applications: Automatic packaging (FFS); multilayer packaging films; films for lamination. Information provided by Braskem

Physical Properties	Metric	English	Comments
Density	0.918 g/cc	0.0332 lb/in³	ASTM D1505
Thickness	25.0 microns	0.984 mil
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 190 °C	1.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	44.0 MPa	6380 psi	ASTM D882
Film Tensile Strength at Yield, TD	46.0 MPa	6670 psi	ASTM D882
Film Elongation at Break, MD	870 %	870 %	ASTM D882
Film Elongation at Break, TD	1060 %	1060 %	ASTM D882
Secant Modulus, MD	0.220 GPa	31.9 ksi	1%; ASTM D882
Secant Modulus, TD	0.224 GPa	32.5 ksi	1%; ASTM D882
Coefficient of Friction	0.20	0.20	ASTM D1894
Elmendorf Tear Strength, MD	10.5 g/micron	267 g/mil	ASTM 1922
Elmendorf Tear Strength, TD	17.5 g/micron	445 g/mil	ASTM 1922
Dart Drop	32.8 g/micron	833 g/mil	ASTM D1709
Heat Seal Strength Initiation Temperature	99.0 °C	210 °F	Sealing Initial Temperature

Optical Properties	Metric	English	Comments
Haze	9.0 %	9.0 %	ASTM D1003
Gloss	13 %	13 %	ASTM D2457

Descriptive Properties	Value	Comments
Additives	Antiblock, Slip, and PPA
Puncture Strength	30 J/mm	ASTM D5748

Users viewing this material also viewed the following: