- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene Copolymer
- Braskem PCD 0140BR HECO Polypropylene Heterophasic Copolymer
Braskem PCD 0140BR HECO Polypropylene Heterophasic Copolymer
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene Copolymer |
| Manufacturer | Braskem |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem PCD 0140BR HECO Polypropylene Heterophasic Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PCD 0140BR is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140BR is highly protected against thermal aging, designed for continuous use at high temperatures, and UV stabilized. Its applications include: external three layer extruded polypropylene (topcoating) based coatings for corrosion protection of welded and seamless steel pipes (3LPP); and topcoating and undercoating in thermal insulation coating of steel pipes.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.915 g/cc | 0.0331 lb/in³ | ASTM-D792 |
| Oxidative Induction Time (OIT) | >= 50 min @Temperature 220 °C |
>= 50 min @Temperature 428 °F |
ASTM-D3895 |
| Melt Flow | 0.75 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.75 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM-D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 66 | 66 | ASTM-D2240 |
| Tensile Strength, Yield | 25.0 MPa | 3630 psi | ASTM-D638 |
| Elongation at Break | >= 400 % | >= 400 % | ASTM-D638 |
| >= 140 % @Time 1.26e+7 sec |
>= 140 % @Time 3500 hour |
UV Stability | |
| Elongation at Yield | 7.0 % | 7.0 % | ASTM-D638 |
| Flexural Modulus, 1% Secant | 1100 MPa | 160000 psi | ASTM-D790 |
| Taber Abrasion, mg/1000 Cycles | 7.0 @Load 1.00 kg |
7.0 @Load 2.20 lb |
CS-17 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | <= 0.220 W/m-K | <= 1.53 BTU-in/hr-ft²-°F | ASTM C177/C518 |
| Melting Point | 163 °C | 325 °F | ASTM-D3418 |
| Vicat Softening Point | 147 °C @Load 1.02 kg |
297 °F @Load 2.25 lb |
ASTM-D1525 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | ASTM-D257 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved