- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Nickel Alloy 180 Copper Nickel Resistance Wire
California Fine Wire Nickel Alloy 180 Copper Nickel Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Copper Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Nickel Alloy 180 Copper Nickel Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.89 g/cc | 0.321 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 345 MPa | 50000 psi | Annealed |
| 689 MPa | 100000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.8 µm/m-°C @Temperature 20.0 °C |
8.78 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.385 J/g-°C @Temperature 20.0 °C |
0.0920 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 35.0 W/m-K | 243 BTU-in/hr-ft²-°F | |
| Melting Point | 1100 °C | 2012 °F | |
| Maximum Service Temperature, Air | 1000 °C | 1830 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Copper, Cu | 78 % | 78 % | |
| Nickel, Ni | 22 % | 22 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000299 ohm-cm | 0.0000299 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | None | |
| Temperature Coefficient of Resistance | 0.00018 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | -0.037 |
Users viewing this material also viewed the following:
- Outokumpu 4713 High Temperature Ferritic Stainless Steel
- SABIC Innovative Plastics LNP KONDUIT RTF2B PA 66 (Asia Pacific)
- Techmer ES HiFill® PA6 E HS N
- Solvay Sulfuric Acid 93% Water White Grade
- Lubrizol Estane® MVT 90AF3 Thermoplastic Polyurethane, Moisture Vapor Transmission
- Total PPR 3261 Random Copolymer Polypropylene, Extrusion Grade
- Weartech International WT 45 Nickel Hardfacing & Wear Resistant Alloy
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 120 PHR N774 Filler
- CP-Polymer-Technik Wellamid® 6000 GX 350 HWCP Combination Nylon 6, Heat Stabilized, Conditioned
Copyright © lookpolymers.com All Rights Reserved