Celanese VECTRA MT1310 LCP, 30% Medical Technology

Category	Polymer , Thermoplastic , Liquid Crystal Polymer (LCP) , Liquid Crystal Polymer (LCP), 30% Glass Fiber Filled
Manufacturer	Celanese Corporation
Trade Name	VECTRA
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Celanese VECTRA MT1310 LCP, 30% Medical Technology.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable for vapor phase surface mount electrical and electronic devices. 30% glass reinforcedInformation provided by Celanese

Physical Properties	Metric	English	Comments
Density	1.62 g/cc	0.0585 lb/in³	ISO 1183
Moisture Absorption	0.0400 %	0.0400 %	23°C/50%RH; ISO 62
Linear Mold Shrinkage, Flow	0.00200 cm/cm	0.00200 in/in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.00400 cm/cm	0.00400 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	85.0	85.0	ISO 2039-2
Tensile Strength at Break	190 MPa	27600 psi	5mm/min; ISO 527-2/1A
Elongation at Break	2.10 %	2.10 %	5mm/min; ISO 527-2/1A
Tensile Modulus	15.0 GPa	2180 ksi	50mm/min; ISO 527-2/1A
Flexural Strength	280 MPa	40600 psi	ISO 178
Flexural Modulus	14.5 GPa	2100 ksi	ISO 178
Compressive Strength	100 MPa @Strain 1.00 %	14500 psi @Strain 1.00 %	ISO 604
Compressive Modulus	14.5 GPa	2100 ksi	ISO 604
Izod Impact, Notched (ISO)	24.0 kJ/m²	11.4 ft-lb/in²	ISO 180/1A
	29.0 kJ/m² @Temperature 23.0 °C	13.8 ft-lb/in² @Temperature 73.4 °F	ISO 180/1U
Charpy Impact Unnotched	3.30 J/cm²	15.7 ft-lb/in²	ISO 179/1eU
Charpy Impact, Notched	2.60 J/cm²	12.4 ft-lb/in²	ISO 179/1eA
Tensile Creep Modulus, 1 hour	12600 MPa	1.83e+6 psi	ISO 899-1
Tensile Creep Modulus, 1000 hours	10900 MPa	1.58e+6 psi	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	6.00 µm/m-°C	3.33 µin/in-°F	ISO 11359-2
CTE, linear, Transverse to Flow	23.0 µm/m-°C	12.8 µin/in-°F	ISO 11359-2
Melting Point	280 °C	536 °F	10°C/min; ISO 11357-1,-2,-3
Deflection Temperature at 0.46 MPa (66 psi)	250 °C	482 °F	ISO 75-1, -2
Deflection Temperature at 1.8 MPa (264 psi)	235 °C	455 °F	ISO 75-1, -2
Deflection Temperature at 8.0 MPa	190 °C	374 °F	ISO 75-1, -2
Vicat Softening Point	160 °C	320 °F	ISO 306
Flammability, UL94	V-0	V-0
Oxygen Index	45.0 %	45.0 %	ISO 4589

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	IEC 60093
Dielectric Constant	3.70 @Frequency 1.00e+6 Hz	3.70 @Frequency 1.00e+6 Hz	IEC 60250
	4.20 @Frequency 100 Hz	4.20 @Frequency 100 Hz	IEC 60250
Dielectric Strength	31.0 kV/mm	787 kV/in	IEC 60243-1
Dissipation Factor	0.0160 @Frequency 100 Hz	0.0160 @Frequency 100 Hz	IEC 60250
	0.0180 @Frequency 1.00e+6 Hz	0.0180 @Frequency 1.00e+6 Hz	IEC 60250
Arc Resistance	140 sec	140 sec	Internal
Comparative Tracking Index	175 V	175 V	IEC 60112

Processing Properties	Metric	English	Comments
Processing Temperature	80.0 - 120 °C	176 - 248 °F	cavity
	285 - 295 °C	545 - 563 °F	hot runner
Feed Temperature	60.0 - 80.0 °C	140 - 176 °F
Middle Barrel Temperature	20.0 - 30.0 °C	68.0 - 86.0 °F
Zone 1	270 - 280 °C	518 - 536 °F
Zone 2	275 - 285 °C	527 - 545 °F
Zone 3	280 - 290 °C	536 - 554 °F
Zone 4	285 - 295 °C	545 - 563 °F
Die Temperature	290 - 300 °C	554 - 572 °F
Melt Temperature	285 - 295 °C	545 - 563 °F
	293 °C	559 °F	ISO 294
Mold Temperature	60.0 °C	140 °F	ISO 294
Injection Velocity	150 mm/sec	5.91 in/sec	ISO 294
Drying Temperature	>= 150 °C	>= 302 °F
Dry Time	4.00 - 6.00 hour	4.00 - 6.00 hour
Moisture Content	<= 0.0100 %	<= 0.0100 %
Injection Pressure	50.0 - 150 MPa	7250 - 21800 psi
Hold Pressure	48.0 MPa	6960 psi	ISO 294
	50.0 - 150 MPa	7250 - 21800 psi
Back Pressure	<= 3.00 MPa	<= 435 psi
Screw Speed	80.0 rpm @Diameter 40.0 mm	80.0 rpm @Diameter 1.57 in
	140 rpm @Diameter 25.0 mm	140 rpm @Diameter 0.984 in
	200 rpm @Diameter 16.0 mm	200 rpm @Diameter 0.630 in

Descriptive Properties	Value	Comments
Injection molding	Yes
Injection Speed	very fast

Users viewing this material also viewed the following: