DuPont Performance Polymers Hytrel® 4069 Polyester Elastomer TPC-ET (Unverified Data**)

Category	Polymer , Thermoplastic , Polyester, TP , Polyester Thermoplastic Elastomer
Manufacturer	DuPont Performance Polymers
Trade Name	Hytrel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Hytrel® 4069 Polyester Elastomer TPC-ET (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

40 Shore D High Performance Polyester ElastomerInformation provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.10 g/cc	0.0397 lb/in³
	1.11 g/cc	0.0401 lb/in³	ISO 1183
Water Absorption	0.70 % @Thickness 2.00 mm	0.70 % @Thickness 0.0787 in	Sim. to ISO 62
Moisture Absorption	0.300 % @Thickness 2.00 mm	0.300 % @Thickness 0.0787 in	Sim. to ISO 62
Water Absorption at Saturation	0.70 %	0.70 %	Immersion 24h; ASTM D570
Viscosity	59000 cP @Shear Rate 5000 1/s, Temperature 250 °C	59000 cP @Shear Rate 5000 1/s, Temperature 482 °F	ISO 11403-1 -2
	65000 cP @Shear Rate 5000 1/s, Temperature 230 °C	65000 cP @Shear Rate 5000 1/s, Temperature 446 °F	ISO 11403-1 -2
	73000 cP @Shear Rate 5000 1/s, Temperature 210 °C	73000 cP @Shear Rate 5000 1/s, Temperature 410 °F	ISO 11403-1 -2
	216000 cP @Shear Rate 500 1/s, Temperature 250 °C	216000 cP @Shear Rate 500 1/s, Temperature 482 °F	ISO 11403-1 -2
	268000 cP @Shear Rate 500 1/s, Temperature 230 °C	268000 cP @Shear Rate 500 1/s, Temperature 446 °F	ISO 11403-1 -2
	327000 cP @Shear Rate 500 1/s, Temperature 210 °C	327000 cP @Shear Rate 500 1/s, Temperature 410 °F	ISO 11403-1 -2
Linear Mold Shrinkage, Flow	0.0080 cm/cm	0.0080 in/in	ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4 2577
Melt Flow	7.7 g/10 min @Load 2.16 kg, Temperature 220 °C	7.7 g/10 min @Load 4.76 lb, Temperature 428 °F	cm³/10min; ISO 1133
	8.5 g/10 min @Load 2.16 kg, Temperature 220 °C	8.5 g/10 min @Load 4.76 lb, Temperature 428 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	33	33	15s; ISO 868
	<= 37	<= 37	ISO 868
Tensile Strength at Break	29.0 MPa	4210 psi	ISO 527-1/-2
Tensile Stress	3.20 MPa @Strain 10.0 %	464 psi @Strain 10.0 %	ISO 527-1/-2
	6.70 MPa @Strain 50.0 %	972 psi @Strain 50.0 %	ISO 527-1/-2
Elongation at Break	>= 300 %	>= 300 %	ISO 527-1/-2
	800 %	800 %	Nominal; ISO 527-1/-2
Tensile Modulus	0.0450 GPa	6.53 ksi	ISO 527-1/-2
Flexural Modulus	0.0450 GPa	6.53 ksi	ISO 178
Izod Impact, Notched (ISO)	NB	NB	ISO 180/1A
	NB @Temperature -40.0 °C	NB @Temperature -40.0 °F	ISO 180/1A
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	NB	NB	ISO 179/1eA
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eA
	NB @Temperature -40.0 °C	NB @Temperature -40.0 °F	ISO 179/1eA
Tear Strength	100 kN/m	571 pli	parallel; ISO 34-1
	100 kN/m	571 pli	normal; ISO 34-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	220 µm/m-°C	122 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	190 µm/m-°C	106 µin/in-°F	ISO 11359-1/-2
Melting Point	193 °C	379 °F	10°C/min; ISO 11357-1/-3
Brittleness Temperature	-96.0 °C	-141 °F	ISO 974
Glass Transition Temp, Tg	-50.0 °C	-58.0 °F	10°C/min; ISO 11357-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	IEC 60695-11-10
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	IEC 60695-11-10
Oxygen Index	20 %	20 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	4.00e+12 ohm-cm	4.00e+12 ohm-cm	IEC 60093
Surface Resistance	3.00e+14 ohm	3.00e+14 ohm	IEC 60093
Dielectric Constant	4.7 @Frequency 1.00e+6 Hz	4.7 @Frequency 1.00e+6 Hz	IEC 60250
	4.8 @Frequency 100 Hz	4.8 @Frequency 100 Hz	IEC 60250
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60243-1
Dissipation Factor	0.013 @Frequency 100 Hz	0.013 @Frequency 100 Hz	IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Delivery Form	Pellets
Emission of organic compounds	10 µgC/g	VDA 277
Odour	class 4	VDA 270
Part Marking Code	>TPC-ET<	ISO 11469
Processing	Casting
	Coatable
	Film Extrusion
	Injection Moulding
	Other Extrusion
	Profile Extrusion
	Sheet Extrusion
	Thermoforming
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	TPC-ET	ISO 1043
Special Characteristics	Light stabilised or stable to light
UL recognition	UL

Users viewing this material also viewed the following: