- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- DuPont Performance Polymers Zytel® FN718 NC010A Nylon 66
DuPont Performance Polymers Zytel® FN718 NC010A Nylon 66
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | DuPont Performance Polymers |
| Trade Name | Zytel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DuPont Performance Polymers Zytel® FN718 NC010A Nylon 66.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Zytel® FN718 NC010A is a flexible, plasticizer free modified polyamide 66 resin having good heat aging and chemical resistance.Information provided by DuPont Performance Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | DAM; ISO 1183 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 40.0 MPa @Temperature 23.0 °C |
5800 psi @Temperature 73.4 °F |
DAM; ISO 527 |
| Elongation at Break | >= 50 % @Temperature 23.0 °C |
>= 50 % @Temperature 73.4 °F |
DAM; nominal; ISO 527 |
| 125 % @Temperature 23.0 °C |
125 % @Temperature 73.4 °F |
DAM; nominal; ISO 527 | |
| 150 % @Temperature 23.0 °C |
150 % @Temperature 73.4 °F |
DAM; ISO 527 | |
| Tensile Modulus | 1.05 GPa @Temperature 23.0 °C |
152 ksi @Temperature 73.4 °F |
DAM; ISO 527 |
| Flexural Modulus | 1.05 GPa @Temperature 23.0 °C |
152 ksi @Temperature 73.4 °F |
DAM; ISO 178 |
| Izod Impact, Notched (ISO) | 20.0 kJ/m² @Temperature -40.0 °C |
9.52 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 180/1A |
| 35.0 kJ/m² @Temperature -20.0 °C |
16.7 ft-lb/in² @Temperature -4.00 °F |
DAM; ISO 180/1A | |
| NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
DAM; ISO 180/1A | |
| Charpy Impact, Notched | 2.00 J/cm² @Temperature -40.0 °C |
9.52 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 179/1eA |
| 7.50 J/cm² @Temperature 23.0 °C |
35.7 ft-lb/in² @Temperature 73.4 °F |
DAM; ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 263 °C | 505 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| Deflection Temperature at 0.46 MPa (66 psi) | 75.0 °C | 167 °F | DAM; ISO 75-1/-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 50.0 °C | 122 °F | DAM; ISO 75-1/-2 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 285 °C | 545 °F | DAM; Optimum; Injection Molding |
| 275 - 295 °C | 527 - 563 °F | DAM; Injection Molding | |
| Mold Temperature | 60.0 °C | 140 °F | DAM; optimum; Injection Molding |
| 40.0 - 80.0 °C | 104 - 176 °F | DAM; Injection Molding | |
| Drying Temperature | 80.0 °C | 176 °F | DAM; Injection Molding |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM; Injection Molding |
| Moisture Content | <= 0.20 % | <= 0.20 % | DAM; Injection Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Natural Color | DAM |
| Forms | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Material Status | Current | DAM |
| Part Marking Code | >PA66-F< | ISO 11469; DAM |
| Processing Method | Injection Molding | DAM |
| Product Category | Extrusion Resins | DAM |
| Toughened Resins | DAM | |
| Unreinforced Resins | DAM | |
| Region Available - Global | Yes | DAM |
| Resin Identification | PA66-F | ISO 1043; DAM |
| RoHS Compliance | Contact Manufacturer | DAM |
Users viewing this material also viewed the following:
- Polimeri Europa Riblene® FM 34 Low Density Polyethylene - Blown Film Extrusion
- SABIC Innovative Plastics GELOY CR7020 ASA
- Lubriplate Brick Grease Specialty Lubricant and Grease
- KKPC KOSYN KSL 105 Styrene-Butadiene Latex
- A. Schulman SCHULAMID® 66 MK4015H 40% Glass Fiber/Mineral Reinforced, Heat Stabilized Nylon 66
- Braskem BF 0323/12 HC LDPE Blown Film Extrusion Polyethylene
- 3M 7000 Series Copper Roofing Granule (Little Rock)
- Braskem IE59U3 HDPE Injection Molding Polyethylene Homopolymer
- Fainplast Compounds PM 7516 Flexible PVC, Lead Free
Copyright © lookpolymers.com All Rights Reserved