- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced, Flame Retardant
- DuPont Performance Polymers Zytel® FR7025V0F NC010 Nylon 66 (Unverified Data**)
DuPont Performance Polymers Zytel® FR7025V0F NC010 Nylon 66 (Unverified Data**)
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced, Flame Retardant |
| Manufacturer | DuPont Performance Polymers |
| Trade Name | Zytel® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DuPont Performance Polymers Zytel® FR7025V0F NC010 Nylon 66
(Unverified Data**).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Zytel® FR7025V0F NC010 is a flame retardant polyamide 66 resin for injection molding. It does not contain elemental phosphorous, halogens or heavy metals.Information provided by DuPont Performance Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc | DAM; ASTM D792 |
| Density | 1.16 g/cc | 0.0419 lb/in³ | DAM; ISO 1183 |
| Water Absorption | 1.8 % @Temperature 23.0 °C |
1.8 % @Temperature 73.4 °F |
Immersion 24h; DAM; ISO 62, Similar to |
| Linear Mold Shrinkage | 0.0080 cm/cm @Thickness 1.60 mm |
0.0080 in/in @Thickness 0.0630 in |
Flow; DAM |
| 0.0080 cm/cm @Thickness 1.60 mm |
0.0080 in/in @Thickness 0.0630 in |
Transverse; DAM | |
| 0.011 cm/cm @Thickness 3.20 mm |
0.011 in/in @Thickness 0.126 in |
Flow; DAM | |
| 0.011 cm/cm @Thickness 3.20 mm |
0.011 in/in @Thickness 0.126 in |
Transverse; DAM | |
| Linear Mold Shrinkage, Flow | 0.0090 cm/cm @Thickness 2.00 mm |
0.0090 in/in @Thickness 0.0787 in |
DAM; ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.010 cm/cm @Thickness 2.00 mm |
0.010 in/in @Thickness 0.0787 in |
DAM; ISO 294-4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 80.0 MPa @Temperature 23.0 °C |
11600 psi @Temperature 73.4 °F |
DAM; ISO 527 |
| Tensile Strength | 89.6 MPa @Temperature 23.0 °C |
13000 psi @Temperature 73.4 °F |
DAM; ASTM D638 |
| Tensile Strength, Yield | 90.0 MPa @Temperature 23.0 °C |
13100 psi @Temperature 73.4 °F |
50mm/min; DAM; ISO 527 |
| Elongation at Break | 10 % @Temperature 23.0 °C |
10 % @Temperature 73.4 °F |
DAM; nominal; ISO 527 |
| 10 % @Temperature 23.0 °C |
10 % @Temperature 73.4 °F |
DAM; ISO 527 | |
| 14 % @Temperature 23.0 °C |
14 % @Temperature 73.4 °F |
DAM; ASTM D638 | |
| Elongation at Yield | 4.0 % @Temperature 23.0 °C |
4.0 % @Temperature 73.4 °F |
50mm/min; DAM; ISO 527 |
| Tensile Modulus | 3.75 GPa @Temperature 23.0 °C |
544 ksi @Temperature 73.4 °F |
DAM; ISO 527 |
| Flexural Modulus | 3.45 GPa @Temperature 23.0 °C |
500 ksi @Temperature 73.4 °F |
DAM; ASTM D790 |
| 3.66 GPa @Temperature 23.0 °C |
531 ksi @Temperature 73.4 °F |
DAM; ISO 178 | |
| Izod Impact, Notched | 0.430 J/cm @Temperature 23.0 °C |
0.806 ft-lb/in @Temperature 73.4 °F |
DAM; ASTM D256 |
| Charpy Impact Unnotched | 13.5 J/cm² @Temperature 23.0 °C |
64.2 ft-lb/in² @Temperature 73.4 °F |
DAM; ISO 179/1eU |
| Charpy Impact, Notched | 0.300 J/cm² @Temperature -40.0 °C |
1.43 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 179/1eA |
| 0.370 J/cm² @Temperature 23.0 °C |
1.76 ft-lb/in² @Temperature 73.4 °F |
DAM; ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 260 °C | 500 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| 264 °C | 507 °F | DAM; ASTM D3418 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 230 °C | 446 °F | DAM; ASTM D648 |
| 235 °C | 455 °F | DAM; ISO 75-1/-2 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | DAM; ASTM D648 |
| 84.0 °C | 183 °F | DAM; ISO 75-1/-2 | |
| UL RTI, Electrical | 130 °C @Thickness 1.50 mm |
266 °F @Thickness 0.0591 in |
DAM; UL 746B |
| 130 °C @Thickness 3.00 mm |
266 °F @Thickness 0.118 in |
DAM; UL 746B | |
| 130 °C @Thickness 0.750 mm |
266 °F @Thickness 0.0295 in |
DAM; UL 746B | |
| UL RTI, Mechanical with Impact | 75.0 °C @Thickness 0.750 mm |
167 °F @Thickness 0.0295 in |
DAM; UL 746B |
| 75.0 °C @Thickness 1.50 mm |
167 °F @Thickness 0.0591 in |
DAM; UL 746B | |
| 75.0 °C @Thickness 3.00 mm |
167 °F @Thickness 0.118 in |
DAM; UL 746B | |
| UL RTI, Mechanical without Impact | 85.0 °C @Thickness 0.750 mm |
185 °F @Thickness 0.0295 in |
DAM; UL 746B |
| 85.0 °C @Thickness 1.50 mm |
185 °F @Thickness 0.0591 in |
DAM; UL 746B | |
| 85.0 °C @Thickness 3.00 mm |
185 °F @Thickness 0.118 in |
DAM; UL 746B | |
| Flammability, UL94 | V-0 @Thickness 0.750 mm |
V-0 @Thickness 0.0295 in |
DAM; IEC 60695-11-10 |
| V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | |
| V-0 @Thickness 3.00 mm |
V-0 @Thickness 0.118 in |
DAM; IEC 60695-11-10 | |
| V-0 @Thickness 3.00 mm |
V-0 @Thickness 0.118 in |
DAM; UL94 | |
| V-0 @Thickness 0.750 mm |
V-0 @Thickness 0.0295 in |
DAM; UL94 | |
| V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
DAM; UL94 | |
| Glow Wire Test | 775 °C @Thickness 3.00 mm |
1430 °F @Thickness 0.118 in |
DAM; Ignition; IEC 60695-2-13 |
| 775 °C @Thickness 1.50 mm |
1430 °F @Thickness 0.0591 in |
DAM; Ignition; IEC 60695-2-13 | |
| 960 °C @Thickness 1.50 mm |
1760 °F @Thickness 0.0591 in |
DAM; IEC 60695-2-12 | |
| 960 °C @Thickness 3.00 mm |
1760 °F @Thickness 0.118 in |
DAM; IEC 60695-2-12 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Comparative Tracking Index | >= 600 V | >= 600 V | DAM; IEC 60112 |
| >= 600 V @Thickness 3.00 mm, Temperature 23.0 °C |
>= 600 V @Thickness 0.118 in, Temperature 73.4 °F |
DAM; UL 746A |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 280 °C | 536 °F | DAM; Optimum |
| 270 - 290 °C | 518 - 554 °F | DAM | |
| Mold Temperature | 70.0 °C | 158 °F | DAM; optimum |
| 50.0 - 90.0 °C | 122 - 194 °F | DAM | |
| Drying Temperature | 80.0 °C | 176 °F | DAM |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM |
| Moisture Content | <= 0.20 % | <= 0.20 % | DAM |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Additive | Flame Retardant | DAM |
| Lubricant | DAM | |
| Appearance | Natural Color | DAM |
| Contains Flame Retardant | Yes | DAM |
| Drying Recommended | Yes, if moisture content of resin exceeds recommended level | DAM |
| Features | Crystalline, Semi | DAM |
| Flame Retardant | DAM | |
| Nucleated | DAM | |
| Processability, Good | DAM | |
| Flame Retardant - Halogen/Red Phosphorus Free | Yes | DAM |
| Forms | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Heat Stabilized | Yes | DAM |
| Material Status | Current | DAM |
| Part Marking Code | >PA66-FR(30)< | ISO 11469; DAM |
| Polymer Family | Polyamide | DAM |
| Polymer Type | PA66 | DAM |
| Processing Method | Injection Molding | DAM |
| Product Category | Flame Retardant Resins | DAM |
| Unreinforced Resins | DAM | |
| Region Available - Global | Yes | DAM |
| Resin Identification | PA66-FR(30) | ISO 1043; DAM |
| RoHS Compliance | Contact Manufacturer | DAM |
| Ultrasonic Weldable | Yes | DAM |
| Uses | Connectors | DAM |
| Electrical Parts | DAM | |
| Electrical/Electronic Applications | DAM |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved