Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Eurostar Staramide BT6 PA6, 30% Mineral Filled, Injection Molded

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Mineral Filled
Manufacturer Eurostar Engineering Plastics
Trade Name Staramide
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Eurostar Staramide BT6 PA6, 30% Mineral Filled, Injection Molded.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Staramide BT6 is a 30% Mineral Filled, Polyamide 6, Injection Molding ResinInformation provided by Eurostar.
Physical Properties Metric English Comments
Density 1.37 g/cc
0.0495 lb/in³
ISO 1183
Water Absorption at Saturation 6.5 %

@Temperature 23.0 °C
6.5 %

@Temperature 73.4 °F
ISO 62
Mechanical Properties Metric English Comments
Hardness, Rockwell L 105
105
ISO 2039-2
Tensile Strength at Break 80.0 MPa
11600 psi
5 mm/min; ISO 527
Elongation at Break 2.0 %
2.0 %
5 mm/min; ISO 527
Tensile Modulus 7.50 GPa
1090 ksi
1 mm/min; ISO 527
Flexural Strength 125 MPa
18100 psi
2 mm/min; ISO 178
Flexural Modulus 7.00 GPa
1020 ksi
2 mm/min; ISO 178
Izod Impact, Notched (ISO) 4.00 kJ/m²
1.90 ft-lb/in²
80x10x4; ISO 180/1A
Charpy Impact Unnotched 5.00 J/cm²
23.8 ft-lb/in²
Edgew 80x10x4 sp=62; ISO 179/1eU
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 40.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
22.2 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
CTE, linear, Transverse to Flow 50.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
27.8 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi) 205 °C
401 °F
Edgew 120x10x4, sp=100 mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi) 165 °C
329 °F
Edgew 120x10x4, sp=100 mm; ISO 75/Ae
Vicat Softening Point 222 °C
432 °F
B/120; ISO 306
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
Oxygen Index 24 %
24 %
ISO 4589
Glow Wire Test 650 °C

@Thickness 2.00 mm
1200 °F

@Thickness 0.0787 in
IEC 60695-2-12
Electrical Properties Metric English Comments
Comparative Tracking Index 350 V
350 V
M; IEC 60112
425 V
425 V
IEC 60112
Processing Properties Metric English Comments
Zone 1 230 - 240 °C
446 - 464 °F
Zone 2 240 - 250 °C
464 - 482 °F
Zone 3 240 - 270 °C
464 - 518 °F
Melt Temperature 240 - 270 °C
464 - 518 °F
Mold Temperature 60.0 - 80.0 °C
140 - 176 °F
Drying Temperature 75.0 - 85.0 °C

@Time 14400 - 21600 sec
167 - 185 °F

@Time 4.00 - 6.00 hour
Moisture Content 0.20 %
0.20 %
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved