Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Idemitsu Kosan Xarec® N WA 5030 SPS, 30% Glass Filled

Category Polymer , Thermoplastic , Polystyrene (PS) , Syndiotactic Polystyrene (SPS) , Syndiotactic Polystyrene (SPS) with Glass or Carbon Fiber
Manufacturer Idemitsu Kosan Co., Ltd.
Trade Name Xarec®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Idemitsu Kosan Xarec® N WA 5030 SPS, 30% Glass Filled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Physical Properties Metric English Comments
Density 1.35 g/cc
0.0488 lb/in³
Filler Content 30 %
30 %
Water Absorption 0.19 %
0.19 %
24 hrs., 50% RH
Linear Mold Shrinkage, Flow 0.0020 - 0.0040 cm/cm
0.0020 - 0.0040 in/in
Linear Mold Shrinkage, Transverse 0.0030 - 0.0060 cm/cm
0.0030 - 0.0060 in/in
Mechanical Properties Metric English Comments
Tensile Strength at Break 165 MPa
23900 psi
Elongation at Break 2.4 %
2.4 %
Tensile Modulus 10.0 GPa
1450 ksi
Flexural Yield Strength 235 MPa
34100 psi
Flexural Modulus 9.40 GPa
1360 ksi
Izod Impact, Notched (ISO) 10.0 kJ/m²
4.76 ft-lb/in²
Izod Impact, Unnotched (ISO) 40.0 kJ/m²
19.0 ft-lb/in²
Charpy Impact Unnotched 4.70 J/cm²
22.4 ft-lb/in²
Charpy Impact, Notched 1.10 J/cm²
5.23 ft-lb/in²
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 23.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
12.8 µin/in-°F

@Temperature -22.0 - 86.0 °F
CTE, linear, Transverse to Flow 43.0 µm/m-°C
23.9 µin/in-°F
Deflection Temperature at 0.46 MPa (66 psi) 260 °C
500 °F
Deflection Temperature at 1.8 MPa (264 psi) 245 °C
473 °F
UL RTI, Electrical 50.0 °C
122 °F
UL746B
UL RTI, Mechanical with Impact 50.0 °C
122 °F
UL746B
UL RTI, Mechanical without Impact 50.0 °C
122 °F
UL746B
Flammability, UL94 HB

@Thickness 0.750 mm
HB

@Thickness 0.0295 in
Electrical Properties Metric English Comments
Electrical Resistivity 7.40e+15 ohm-cm
7.40e+15 ohm-cm
Dielectric Constant 3.3
3.3
Dielectric Strength 22.0 kV/mm
559 kV/in
ASTM D145
Dissipation Factor 0.034
0.034
IEC 60250
Arc Resistance 120 - 180 sec
120 - 180 sec
ASTM D495
Comparative Tracking Index 250 - 400 V
250 - 400 V
IEC 60112
Hot Wire Ignition, HWI 7.0 - 15 sec

@Thickness 1.50 mm
7.0 - 15 sec

@Thickness 0.0591 in
UL 746A
High Amp Arc Ignition, HAI >= 120 arcs

@Thickness 1.50 mm
>= 120 arcs

@Thickness 0.0591 in
UL 746A
Processing Properties Metric English Comments
Melt Temperature 280 - 310 °C
536 - 590 °F
Mold Temperature 50.0 - 80.0 °C
122 - 176 °F
Drying Temperature 80.0 °C
176 °F
1 - 3 hrs
Descriptive Properties Value Comments
Comments Nylon/SPS blend
Optimized dimensional stability
Copyright © lookpolymers.com All Rights Reserved