POLYMER SEARCH

Ineos ABS LustranÂ® 750 ABS, Molding Grade

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded
Manufacturer	Ineos ABS
Trade Name	Lustran®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos ABS LustranÂ® 750 ABS, Molding Grade.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LustranÂ® 750 resin is a black, virgin injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It is designed for molded drain, waste, and vent (DWV) fittings. LustranÂ® 750 (901802 black) resin meets or exceeds ASTM D 3965 3-2-2-2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14.

Physical Properties	Metric	English	Comments
Density	1.05 g/cc	0.0379 lb/inÂ³	ASTM-D792

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	45.0 MPa	6530 psi	ASTM-D638
Tensile Modulus	2.10 GPa	305 ksi	ASTM-D638
Izod Impact, Notched	1.87 J/cm @Thickness 3.20 mm, Temperature -30.0 Â°C	3.50 ft-lb/in @Thickness 0.126 in, Temperature -22.0 Â°F	ASTM-D256
	3.74 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	7.01 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM-D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	100 Â°C @Thickness 6.35 mm	212 Â°F @Thickness 0.250 in	Annealed; ASTM-D648

Processing Properties	Metric	English	Comments
Melt Temperature	232 - 243 Â°C	450 - 469 Â°F	Injection Molding
Mold Temperature	43.0 - 66.0 Â°C	109 - 151 Â°F	Injection Molding
Drying Temperature	82.0 - 93.0 Â°C @Time 7200 sec	180 - 199 Â°F @Time 2.00 hour
Moisture Content	<= 0.050 %	<= 0.050 %
Dew Point	<= -29.0 Â°C	<= -20.2 Â°F	inlet air

Descriptive Properties	Value	Comments
Injection Pressure	Moderately High to High, Injection Molding
Injection Speed	Moderate to Fast	Injection Molding

Users viewing this material also viewed the following: