Ineos BarexÂ® 218 E Acrylonitrile-Methyl Acrylate Copolymer

Category	Polymer , Thermoplastic , ABS Polymer , Acrylic (PMMA) , Acrylonitrile-Methyl Acrylate Copolymer
Manufacturer	Ineos Olefins & Polymers USA
Trade Name	Barex®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos BarexÂ® 218 E Acrylonitrile-Methyl Acrylate Copolymer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Extrusion Grade. BarexÂ® Resins are available in either natural or blue tint. BarexÂ® 218E is most commonly used for thermoformed sheet applications in which high impact performance is required.

Physical Properties	Metric	English	Comments
Density	1.11 g/cc	0.0401 lb/inÂ³
Apparent Bulk Density	0.680 g/cc	0.0246 lb/inÂ³
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	ASTM D955
Melt Flow	3.0 g/10 min @Load 12.5 kg, Temperature 200 Â°C	3.0 g/10 min @Load 27.6 lb, Temperature 392 Â°F	2 mm x 8 mm

Mechanical Properties	Metric	English
Hardness, Rockwell M	45	45
Tensile Strength, Yield	51.0 MPa	7400 psi
Elongation at Break	4.0 %	4.0 %
Flexural Yield Strength	93.0 MPa	13500 psi
Flexural Modulus	2.70 GPa	392 ksi
Izod Impact, Notched	9.00 J/cm	16.9 ft-lb/in

Thermal Properties	Metric	English	Comments
Specific Heat Capacity	1.30 J/g-Â°C	0.311 BTU/lb-Â°F
Thermal Conductivity	0.260 W/m-K	1.80 BTU-in/hr-ftÂ²-Â°F
Deflection Temperature at 0.46 MPa (66 psi)	71.0 Â°C	160 Â°F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	ASTM D648
Vicat Softening Point	77.0 Â°C	171 Â°F

Processing Properties	Metric	English	Comments
Processing Temperature	200 Â°C	392 Â°F

Users viewing this material also viewed the following: