- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Blow Molding Grade
- Kazanorgsintez PE2NT76-17 High Density Polyethylene for Blow Molding
Kazanorgsintez PE2NT76-17 High Density Polyethylene for Blow Molding
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | Kazanorgsintez |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kazanorgsintez PE2NT76-17 High Density Polyethylene for Blow Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Production Method: Gaseous-phase method. Application: Compositions are intended for goods produced by injection molding method.Information Provided by Kazanorgsintez
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.955 - 0.961 g/cc @Temperature 23.0 °C |
0.0345 - 0.0347 lb/in³ @Temperature 73.4 °F |
|
| 0.957 - 0.963 g/cc @Temperature 20.0 °C |
0.0346 - 0.0348 lb/in³ @Temperature 68.0 °F |
||
| Volatiles | <= 0.0000090 % | <= 0.0000090 % | |
| Environmental Stress Crack Resistance | >= 30 hour | >= 30 hour | |
| Melt Flow | 2.3 - 3.3 g/10 min @Load 2.16 kg, Temperature 190 °C |
2.3 - 3.3 g/10 min @Load 4.76 lb, Temperature 374 °F |
±10% |
| Ash | <= 0.030 % | <= 0.030 % |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | >= 26.0 MPa | >= 3770 psi | |
| Elongation at Break | >= 750 % | >= 750 % | |
| Tear Strength Test | >= 30 | >= 30 | MPa |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Amount of impurities [pcs] | 5 |
Users viewing this material also viewed the following:
- Qualchem Danamid AFES Polyamide 66
- Kazanorgsintez PE80B-285D High Density Polyethylene Composite, Film Grade
- Industeel SUPERELSO® 690CR Quenched and Tempered High Strength Steel for Leg Components of Jack-up Rigs
- Silikony Polskie Polsil OM 10000 Methyl Silicone Fluid
- Teknor Apex Sinvicomp SHE 5200 Polyvinyl Chloride, Flexible
- Arlon 55946C030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- ATI Allvac® Vasco® 17-4 Precipitation Hardening Steel, Heat Treatment: 1038°C (1900°F) + Age
- Beijing Ranger Chem PBT-201-G30 211 Flame Retarding FR PBT
- BorsodChem ONGRONAT PA-26 MDI Isocyanate
- Sumitomo Bakelite North America FM 1132P Cellulose Reinforced Phenolic Novolac
Copyright © lookpolymers.com All Rights Reserved