Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Kraton® D1126 P (SIS) Radial Copolymer

Category Polymer , Thermoplastic , Elastomer, TPE
Manufacturer Kraton
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Kraton® D1126 P (SIS) Radial Copolymer.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified: Kraton D1126 PT - supplied as a dusted dense pelletRegion: South America, Europe, Asia Pacific, North America, and Japan Uses: Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen ModificationInformation provided by Kraton®
Physical Properties Metric English Comments
Volatiles <= 0.50 %
<= 0.50 %
KM 04
Viscosity 420 cP
420 cP
25% Toluene Solution at 25°C; BAM 922
Melt Flow 22 g/10 min

@Load 5.00 kg,
Temperature 200 °C
22 g/10 min

@Load 11.0 lb,
Temperature 392 °F
Ash 0.20 - 0.40 %
0.20 - 0.40 %
Talc; BAM 908
Mechanical Properties Metric English Comments
Hardness, Shore A 39

@Time 10.0 sec
39

@Time 0.00278 hour
Typical values on polymer compression molded at 300°F; ASTM D2240
Tensile Strength 7.72 MPa
1120 psi
Typical properties on film cast from toluene solution; ASTM D412
Elongation at Break 1400 %
1400 %
Typical properties of film cast from toluene solution; ASTM D412
300% Modulus 0.00248 GPa
0.360 ksi
Typical properties on film cast from toluene solution; ASTM D412
Chemical Properties Metric English Comments
Diblock Content 30 %
30 %
Descriptive Properties Value Comments
Content Antioxidant
0.15-0.3%, KM 08
Polystyrene
20-23%, KM 03
Total Extractables
<1.0%, KM 05
Styrene/Rubber Ratio 21/79
Copyright © lookpolymers.com All Rights Reserved