- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D4433 P (O/E SIS) Linear Triblock Copolymer
Kraton® D4433 P (O/E SIS) Linear Triblock Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D4433 P (O/E SIS) Linear Triblock Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D4433 P is an oiled, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified: Kraton D4433 PT - supplied as a dusted dense pellet Region: Asia Pacific, Europe, Japan, North America, and South AmericaUses: Kraton D4433 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.Applications: Adhesives, Sealant and Coatings and Compounding and Personal HygieneNote 1) Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2%.Information provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.70 % | <= 0.70 % | KM 04 |
| Viscosity | 380 cP | 380 cP | 25% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 25 g/10 min @Load 5.00 kg, Temperature 200 °C |
25 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.30 - 0.40 % | 0.30 - 0.40 % | Talc; BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 29 @Time 10.0 sec |
29 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 6.21 MPa | 901 psi | Measured on films cast from a solution in toluene; ASTM D412 |
| Elongation at Break | 1450 % | 1450 % | Measured on films cast from a solution in toluene; ASTM D412 |
| 300% Modulus | 0.00103 GPa | 0.149 ksi | Measured on films cast from a solution in toluene; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 20 % | 20 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.2%, See note 1), KM 08 |
| Oil | 21.5-24.5%, KM 05 | |
| Polystyrene | 20-24%, KM 03 | |
| Styrene/Rubber Ratio | 22/78 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved