Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Kraton® G1651 + PPE blend (10/90)

Category Polymer , Thermoplastic , Elastomer, TPE , Polyphenylene Ether/PPO
Manufacturer Kraton
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Kraton® G1651 + PPE blend (10/90).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Blending KRATON D and G polymers with PPE significantly improves the toughness at both room and low temperatures. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A-B]n). The KRATON D series consists of an unsaturated polymer, either butadiene or isoprene, as the rubber monomer. The high softening point of the HDPE and the low glass transition temperatures of the D1102 elastomeric midblock give the films a broad range of service temperatures, from below freezing to above boiling. All properties listed below are measured on blown film, 1 mil (25 microns) thick. Information provided by the manufacturer, Kraton® Polymers.
Mechanical Properties Metric English Comments
Flexural Modulus 1.77 GPa
257 ksi
Izod Impact, Notched 1.65 J/cm

@Temperature -29.0 °C
3.09 ft-lb/in

@Temperature -20.2 °F
3.2 mm (0.125 in) notch
5.82 J/cm

@Temperature 23.0 °C
10.9 ft-lb/in

@Temperature 73.4 °F
3.2 mm (0.125 in) notch
Copyright © lookpolymers.com All Rights Reserved