Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LATI LATILUB 82-01M Nylon 12 Base, 1% Molybdenum Disulfide Self Lubricating Plastic  (discontinued **)

Category Polymer , Thermoplastic , Nylon , Nylon 12
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LATI LATILUB 82-01M Nylon 12 Base, 1% Molybdenum Disulfide Self Lubricating Plastic  (discontinued **).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intrinsic properties (moldability, low cost, lightness, high mechanical properties), low friction coefficient and low wear are required.Specific Notes for this Material: polyamide 12 base (PA 12); 1% molybdenum disulfide; good wear resistance.Disclaimer from LATI: This document contains information based on average values as obtained from the results of laboratory tests and observations made on LATI materials. Tested materials were injection molded, used in their natural color, and conditioned in compliance with Standard ASTM D 618, procedure A. These values refer to LATI's best technical and scientific knowledge at the moment of testing and cannot be used as a basis for the development of applications. For a better assessment of the materials, you are kindly requested to contact LATI's technical or commercial offices, which are at your disposal and will supply detailed information on the most suitable characteristics for their intended use. With reference to DPR n.224 dated May 24, 1988, issued in accordance with EC Guide-lines 85/374, LATI Industria Termoplastici S.p.A. declines all responsibility arising from an improper use of the products described in this document.All data provided by LATI.
Physical Properties Metric English Comments
Density 1.04 g/cc
0.0376 lb/in³
ISO 1183
Water Absorption 0.30 %
0.30 %
at 23°C; ISO 62
Linear Mold Shrinkage 0.0070 cm/cm
0.0070 in/in
LATI
Linear Mold Shrinkage, Transverse 0.0070 cm/cm
0.0070 in/in
LATI
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 60.0 MPa
8700 psi
ISO 527
15.0 MPa

@Temperature 120 °C
2180 psi

@Temperature 248 °F
ISO 527
22.0 MPa

@Temperature 90.0 °C
3190 psi

@Temperature 194 °F
ISO 527
34.0 MPa

@Temperature 60.0 °C
4930 psi

@Temperature 140 °F
ISO 527
Flexural Modulus 1.47 GPa
213 ksi
ASTM D790
0.275 GPa

@Temperature 120 °C
39.9 ksi

@Temperature 248 °F
ASTM D790
0.390 GPa

@Temperature 90.0 °C
56.6 ksi

@Temperature 194 °F
ASTM D790
0.685 GPa

@Temperature 60.0 °C
99.4 ksi

@Temperature 140 °F
ASTM D790
Izod Impact, Notched 0.350 J/cm

@Temperature -40.0 °C
0.656 ft-lb/in

@Temperature -40.0 °F
ASTM D256
0.350 J/cm

@Temperature -20.0 °C
0.656 ft-lb/in

@Temperature -4.00 °F
ASTM D256
0.450 J/cm

@Temperature 23.0 °C
0.843 ft-lb/in

@Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 152 °C
306 °F
ASTM D648
Vicat Softening Point 152 °C
306 °F
50°C/h 50N; ISO 306
Flammability, UL94 HB

@Thickness 1.50 mm
HB

@Thickness 0.0591 in
Oxygen Index 22 %
22 %
ISO 4589
Electrical Properties Metric English Comments
Comparative Tracking Index >= 600 V
>= 600 V
IEC 112
Processing Properties Metric English Comments
Melt Temperature 210 - 240 °C
410 - 464 °F
Mold Temperature 60.0 - 80.0 °C
140 - 176 °F
Drying Temperature 80.0 - 100 °C
176 - 212 °F
Temperature can be reduced when using vacuum ovens.
Dry Time >= 3 hour
>= 3 hour
Drying time can be reduced when using vacuum ovens.
Descriptive Properties Value Comments
Heat Resistance - Ball Test (125°C) Y
IEC 335
Heat Resistance - Ball Test (165°C) Y
IEC 335
Injection Speed medium - high
Needle Burner Test N
1.47 mm
N
3.05 mm
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved