- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane, Elastomer, Polyester Grade
- Lubrizol ESTANE® 54600 Ester Based Thermoplastic Polyurethane
Lubrizol ESTANE® 54600 Ester Based Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade |
| Manufacturer | Lubrizol (former Noveon) |
| Trade Name | ESTANE® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lubrizol ESTANE® 54600 Ester Based Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Very good physical properties and chemical resistance and wide processing window for calendering.Uses: Melt coating/calendering, flat die/cast film extrusion Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.22 g/cc | 1.22 g/cc | ASTM D792 |
| Maximum Moisture Content | 0.020 | 0.020 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 89 - 95 @Time 18000 sec |
89 - 95 @Time 5.00 hour |
ASTM D2240 |
| Tensile Strength | 58.6 MPa | 8500 psi | ASTM D412 |
| Tensile Stress | 6.90 MPa @Strain 100 % |
1000 psi @Strain 100 % |
ASTM D412 |
| 24.8 MPa @Strain 300 % |
3600 psi @Strain 300 % |
ASTM D412 | |
| Elongation at Break | 490 % | 490 % | ASTM D412 |
| Tear Strength | 29.8 kN/m | 170 pli | Trouser; ASTM D470 |
| Graves Tear Strength | 112 kN/m | 640 pli | Die C; ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 45 | 45 | H18, 1000g; ASTM D3389 B |
| Compression Set | 27 % | 27 % | ASTM D395 |
| Tensile Set | 30 % | 30 % | 200% elongation; ASTM D412 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 130 °C | 266 °F | DSC |
| 140 °C | 284 °F | Kofler | |
| Glass Transition Temp, Tg | -20.0 °C | -4.00 °F | DSC |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 171 °C | 340 °F | Extrusion |
| Zone 2 | 177 °C | 351 °F | Extrusion |
| Zone 3 | 182 °C | 360 °F | Extrusion |
| Zone 4 | 188 °C | 370 °F | Extrusion |
| Adapter Temperature | 193 °C | 379 °F | 5, Extrusion |
| Die Temperature | 193 °C | 379 °F | Die Zone 1, Extrusion |
| 193 °C | 379 °F | Die Zone 2, Extrusion | |
| Drying Temperature | 104 °C | 219 °F | |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | |
| Dew Point | -40.0 °C | -40.0 °F |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved