Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Lubrizol ESTANE® 58206 Ester Based Thermoplastic Polyurethane

Category Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer Lubrizol (former Noveon)
Trade Name ESTANE®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Lubrizol ESTANE® 58206 Ester Based Thermoplastic Polyurethane.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Features: Good Flexibility at Low Temperatures and Improved Weathering Performance.Uses: Flat Die/Cast Film Extrusion and Hose/Profile Extrusion, Injection Molding.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.
Physical Properties Metric English Comments
Specific Gravity 1.20 g/cc
1.20 g/cc
ASTM D792
Maximum Moisture Content 0.020
0.020
Linear Mold Shrinkage 0.014 cm/cm
0.014 in/in
Injection
Mechanical Properties Metric English Comments
Hardness, Shore A 82 - 88

@Time 5.00 sec
82 - 88

@Time 0.00139 hour
ASTM D2240
Tensile Strength 48.3 MPa
7010 psi
ASTM D412
Elongation at Break 550 %
550 %
ASTM D412
100% Modulus 0.00550 GPa
0.798 ksi
ASTM D412
300% Modulus 0.0104 GPa
1.51 ksi
ASTM D412
Tear Strength 22.8 kN/m
130 pli
Trouser; ASTM D470
Graves Tear Strength 87.7 kN/m
500 pli
Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles 3.0
3.0
H18, 1000g; ASTM D3389 B
Tensile Set 10 %
10 %
200% elongation; ASTM D412
Thermal Properties Metric English Comments
Melting Point 160 °C
320 °F
DSC
Glass Transition Temp, Tg -32.0 °C
-25.6 °F
DSC
Processing Properties Metric English Comments
Rear Barrel Temperature 177 °C
351 °F
Injection
Middle Barrel Temperature 188 °C
370 °F
Injection
Front Barrel Temperature 193 °C
379 °F
Injection
Nozzle Temperature 199 °C
390 °F
Injection
Zone 1 177 °C
351 °F
Extrusion
Zone 2 183 °C
361 °F
Extrusion
Zone 3 188 °C
370 °F
Extrusion
Zone 4 194 °C
381 °F
Extrusion
Adapter Temperature 194 °C
381 °F
5, Extrusion
Die Temperature 194 °C
381 °F
Zone 1, 6, Extrusion
194 °C
381 °F
Zone 2, Extrusion
Melt Temperature 155 °C
311 °F
Kofler
199 °C
390 °F
Injection
Drying Temperature 104 °C
219 °F
Dry Time 2.00 - 4.00 hour
2.00 - 4.00 hour
Dew Point -40.0 °C
-40.0 °F
Injection Pressure 20.7 - 48.3 MPa
3000 - 7000 psi
Injection
Back Pressure 0.345 MPa
50.0 psi
Injection
Screw Speed 20 - 50 rpm
20 - 50 rpm
Injection
Descriptive Properties Value Comments
Volume swell in Jet Fuel JP8 7.7%
ASTM D471
Copyright © lookpolymers.com All Rights Reserved