Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LyondellBasell Petrothene® KR92828 High Density Polyethylene

Category Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Extruded
Manufacturer LyondellBasell (former Equistar)
Trade Name Petrothene®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LyondellBasell Petrothene® KR92828 High Density Polyethylene.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
ApplicationsPETROTHENE KR 92828 is a high molecular weight, high density polyethylene-based compound designed for use in jacketing, conduit or wire insulation. KR 92828 contains a carbon black content of 2.5%. Antioxidant has been added to ensure thermal stability during processing.Processing TechniquesKR 92561, like other thermoplastic polyolefin compounds, can be extruded as wire and cable insulation using a conventional extruder. Below are suggested extrusion conditions for KR 92561. These conditions are intended as general guidelines only and are not optimum values, since manufacturing conditions, such as extruder type and size have an effect on processing of thermoplastic compounds.This product is from the former Equistar product line.
Physical Properties Metric English Comments
Density 0.955 g/cc
0.0345 lb/in³
ASTM D1505
Environmental Stress Crack Resistance >= 1000 hour
>= 1000 hour
Condition A - 10% Igepal®; ASTM D1693
Absorption Coefficient 440
440
ASTM D3349
Carbon Black Loading 2.6 %
2.6 %
Melt Flow 0.15 g/10 min
0.15 g/10 min
ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Shore D 65
65
ASTM D2240
Tensile Strength at Break 31.7 MPa
4600 psi
ASTM D638
Tensile Strength, Yield 19.3 MPa
2800 psi
ASTM D638
Elongation at Break 800 %
800 %
ASTM D638
Flexural Modulus 0.758 GPa
110 ksi
1% Secant; ASTM D780
1% Secant Modulus 531 MPa
77000 psi
ASTM D638
Thermal Properties Metric English Comments
CTE, linear 150 µm/m-°C

@Temperature 20.0 °C
83.3 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Brittleness Temperature <= -76.0 °C
<= -105 °F
F<sub>50</sub>; ASTM D746
Electrical Properties Metric English Comments
Electrical Resistivity 2.00e+17 ohm-cm
2.00e+17 ohm-cm
ASTM D257
Dielectric Constant 2.5

@Frequency 1e+6 Hz
2.5

@Frequency 1e+6 Hz
ASTM D1531
Dielectric Strength 21.7 kV/mm
550 kV/in
ASTM D149
Dissipation Factor 0.00020

@Frequency 1e+6 Hz
0.00020

@Frequency 1e+6 Hz
ASTM D1531
Processing Properties Metric English Comments
Feed Temperature 149 - 163 °C
300 - 325 °F
Zone 2 177 - 204 °C
350 - 400 °F
Zone 3 191 - 204 °C
375 - 400 °F
Zone 4-x 238 - 260 °C
460 - 500 °F
Adapter Temperature 246 - 260 °C
475 - 500 °F
Die Temperature 246 - 260 °C
475 - 500 °F
Melt Temperature 246 - 260 °C
475 - 500 °F
Copyright © lookpolymers.com All Rights Reserved