Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Mitsui MILEXâ„¢ RN-2830MR Acrylic Rubber Modified Phenolic Resin

Category Polymer , Thermoset , Phenolic , Phenolic/Rubber; Molded
Manufacturer Mitsui Chemicals America
Trade Name MILEX™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Mitsui MILEXâ„¢ RN-2830MR Acrylic Rubber Modified Phenolic Resin.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
The MILEXâ„¢ Family of products is widely featured in brake systems of automobiles made by automakers through Mitsui Chemicals'. The phenolic material is primarily used as binders in brake pad and clutch facing disc friction materials. The advantage of incorporating the MILEX material into a brake design is that the material provides a non-abrasive, vibratory free surface finish, which is very important in the performance of the brake system. Additionally, its superior performance at elevated temperatures and excellent moldability aids in brake noise reduction.The RN series are novolak type phenolic resins modified by special elastomers. This series consists of a grouping of acrylic rubber modified resin in addition to the RS-2210MB grade, a silicon rubber modified resin. This series is recognized worldwide by the automotive industry for its thermal shock and chemical resistant properties. In addition, this particular series possesses anti-brake noise and vibratory qualities in brake pad applications. Some of the most demanding electrical applications choose phenolic resin due to the material's high dielectric strength, superior insulation resistance and high temperature resistance. Typical applications include use as an Epoxy Resin hardener for electronic materials such as encapsulation for I.C., an adhesive with elastomers and to improve the high heat resistance of thermoplastics.Applications: Automotive friction materials (brake pads, clutch facing discs, etc)Epoxy resin hardener for electronic materialsAdditive to improve heat resistance of thermoplasticsAdhesives, especially with elastomers, to bond to metalInformation provided by Mitsui.
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 95.0 - 105 °C
203 - 221 °F
Softening point
Processing Properties Metric English Comments
Processing Temperature 150 °C
302 °F
Press Cure, 8-10 minutes
180 °C
356 °F
Post cure, 5 hours
Cure Time 0.583 - 1.58 min
0.00972 - 0.0264 hour
Gelation time
Descriptive Properties Value Comments
Cracking Resistance 4
5=Excellent
Curing Rate 5
1=Slow, 5=Fast
Flow 15-40 m/m
Hardness 3
1=Hard, 5=Soft
Heat Resistance 1
1-5 (5-Excellent)
Kind of Rubber Acrylic
Rubber Content 30 phr
Copyright © lookpolymers.com All Rights Reserved