- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 3104-10 AGATE 5ES
Multibase Multi-Flex® TPE A 3104-10 AGATE 5ES
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 3104-10 AGATE 5ES.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The material is based on Kraton G rubber. It has been engineered for single shot. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.014 cm/cm | 0.014 in/in | ASTM D955 |
| Melt Flow | 6.0 g/10 min | 6.0 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 38 | 38 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D412 |
| Elongation at Break | 580 % | 580 % | ASTM D412 |
| Flexural Modulus | 0.232 GPa | 33.6 ksi | ASTM D790-92 |
| Tear Strength | 77.0 kN/m | 439 pli | ASTM D624 |
Users viewing this material also viewed the following:
- PolyOne Maxxam™ PPH-30T Nat Polypropylene Homopolymer (PP Homopolymer)
- Fiberfil® PP-61/VO/NH Polypropylene Copolymer, Flame Retardant, non-halogenated, UL94 V0
- Solvay TECHNYLSTARâ„¢ AFX 218 V60 PA6, 60% glass filled, DRY
- Techmer ES HiFill® PA6 GF50 IM L NAT001 50% Glass Filled
- Wieland Auropal 50 Casting Alloy
- Total Lumicene® mPE M 2310 EP Metallocene Polyethylene, Blown Film
- DuPont Teijin Films Mylar® TL Polyester Film
- 3M Scotch® 2364 Performance Masking Tape
- Bulk Molding Compounds BMC 620 Mineral Filled, Glass Fiber Reinforced Polyester Compound
Copyright © lookpolymers.com All Rights Reserved