- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), UHMW PE Ultra High Molecular Weight
- Murtfeldt Original Material ”S”® plus + LF ESD Polyethylene, Low Friction Conductive
Murtfeldt Original Material ”S”® plus + LF ESD Polyethylene, Low Friction Conductive
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), UHMW PE Ultra High Molecular Weight |
| Manufacturer | Murtfeldt Kunststoffe GmbH & Co |
| Trade Name | Original Material ”S”® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Murtfeldt Original Material ”S”® plus + LF ESD Polyethylene, Low Friction Conductive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
This material is electrically conductive and has half the sliding friction coefficient of the Original Material ”S”® enabling voltage to be dissipated at maximum speed with the same maximum friction resistance.Special Properties: Extremely high conductivity Voltage dissipation on the surface in less than 0.1s Reduction in drive power with no reduction in performance Minimal and constant sliding friction coefficient even in continuous operation Self-lubricating Approved for use in the food industry (EU and/or FDA)Information provided by Murtfeldt Kunststoffe GmbH & Co. KG.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | <= 0.930 g/cc | <= 0.0336 lb/in³ | ISO 1183 |
| Molecular Weight | 9.00e+6 g/mol | 9.00e+6 g/mol |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 60 | 60 | DIN 53505 |
| Ball Indentation Hardness | 30.0 MPa | 4350 psi | |
| Tensile Strength | 20.0 MPa | 2900 psi | ISO 527 |
| Elongation at Break | 255 % | 255 % | ISO 527 |
| Modulus of Elasticity | 0.700 GPa | 102 ksi | |
| Charpy Impact, Notched | >= 15.0 J/cm² | >= 71.4 ft-lb/in² | ISO 179 |
| Coefficient of Friction, Dynamic | 0.060 - 0.10 | 0.060 - 0.10 | |
| Sand Slurry | 80 | 80 | value in % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 200 µm/m-°C @Temperature 23.0 - 60.0 °C |
111 µin/in-°F @Temperature 73.4 - 140 °F |
|
| Thermal Conductivity | 0.400 W/m-K | 2.78 BTU-in/hr-ft²-°F | ISO 52612 |
| Maximum Service Temperature, Air | 90.0 °C | 194 °F | Short Term |
| 80.0 °C @Time 1.80e+7 sec |
176 °F @Time 5000 hour |
||
| Minimum Service Temperature, Air | -200 °C | -328 °F | |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | <= 1000 ohm-cm | <= 1000 ohm-cm | IEC 60093 |
| Surface Resistance | <= 1.00e+9 ohm | <= 1.00e+9 ohm | IEC 60093 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| European Food 1935/2004 | Yes | Yes | |
| FDA | Yes | Yes |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Black |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved