- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6 Fiber
- NYCOA 715C PA 6
NYCOA 715C PA 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6 Fiber |
| Manufacturer | NYCOA, Inc. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NYCOA 715C PA 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
plasticized, high viscosity extrusion grade for monofilament weed eater, fishing lineInformation provided by NYCOA, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
| Water Absorption | 3.1 % | 3.1 % | ASTM D570 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 57.0 MPa | 8270 psi | ASTM D638 |
| Elongation at Break | 300 % | 300 % | ASTM D638 |
| Flexural Yield Strength | 37.0 MPa | 5370 psi | ASTM D790 |
| Flexural Modulus | 0.862 GPa | 125 ksi | ASTM D790 |
| Izod Impact, Notched | 16.63 J/cm | 31.15 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 220 °C | 428 °F | ASTM D789 |
| Deflection Temperature at 1.8 MPa (264 psi) | 163 °C | 325 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 250 °C | 482 °F | |
| Rear Barrel Temperature | 220 °C | 428 °F | |
| Middle Barrel Temperature | 230 °C | 446 °F | |
| Front Barrel Temperature | 250 °C | 482 °F | |
| Mold Temperature | 80.0 °C | 176 °F | |
| Drying Temperature | 76.0 °C | 169 °F |
Users viewing this material also viewed the following:
- Qualchem Danamid AFGFLPX0-35 Polyamide 66, 35% Glass Fiber
- PolyOne Edgetek® MLS-10GF/000 Polysulfone Alloy - 10% Glass Fiber Reinforced (discontinued **)
- Arlon MT920-10#3.3-P1 0.020" (0.508 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported) with Poly Interleave
- Teknor Apex Monprene® MP-2215 Thermoplastic Elastomer
- Toyobo VYLOPET® EMC532 Injection Molding Polyester Resin, Glass Reinforced
- DuPont Performance Polymers Hytrel® G3548L TPC-ET (Unverified Data**)
- AlphaGary Smokeguard™ LS V 1116 Low Smoke Polyvinyl Chloride
- Bhansali Engineering Abstron HI40I ABS Injection Molding Grade
- DuPont Performance Polymers Neoprene AD-20 Polychloroprene Rubber (discontinued **)
- SMAC CABLE® 25235-40-08 Damping Material
Copyright © lookpolymers.com All Rights Reserved