Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Nilit FRIANYL A63 HH-FK 1020 Nylon 6.6 for injection molding, 10% glass fiber and 20% glass ball reinforced

Category Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer Nilit (formerly Frisetta Polymer)
Trade Name FRIANYL
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Nilit FRIANYL A63 HH-FK 1020 Nylon 6.6 for injection molding, 10% glass fiber and 20% glass ball reinforced.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
Physical Properties Metric English Comments
Density 1.33 g/cc
0.0480 lb/in³
ISO 1183
Water Absorption 1.5 - 2.4 %
1.5 - 2.4 %
ISO 62
Water Absorption at Saturation 5.0 - 7.0 %
5.0 - 7.0 %
ISO 62
Viscosity Measurement 145
145
Viscosity index; ISO 307
Linear Mold Shrinkage 0.0050 - 0.015 cm/cm
0.0050 - 0.015 in/in
FRISETTA Test Method
Mechanical Properties Metric English Comments
Ball Indentation Hardness 167 MPa
24200 psi
ISO 2039-1
Tensile Strength at Break 118 MPa
17100 psi
ISO 527
Elongation at Break 3.0 %
3.0 %
ISO 527
Tensile Modulus 6.40 GPa
928 ksi
ISO 527
Flexural Strength 111 MPa
16100 psi
ISO 178
Flexural Modulus 5.10 GPa
740 ksi
ISO 178
Charpy Impact Unnotched 3.40 J/cm²
16.2 ft-lb/in²
ISO 179/1eU
2.90 J/cm²

@Temperature -30.0 °C
13.8 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
Charpy Impact, Notched 0.390 J/cm²
1.86 ft-lb/in²
ISO 179/1eA
0.350 J/cm²

@Temperature -30.0 °C
1.67 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
Thermal Properties Metric English Comments
Melting Point 256 °C
493 °F
ISO 3146 DSC
Maximum Service Temperature, Air 130 °C
266 °F
Continuous; FRISETTA Test Method
Deflection Temperature at 0.46 MPa (66 psi) 245 °C
473 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 230 °C
446 °F
ISO 75
Electrical Properties Metric English Comments
Dissipation Factor 0.020

@Frequency 1e+6 Hz
0.020

@Frequency 1e+6 Hz
IEC 250
Comparative Tracking Index 550 V
550 V
CTI 100; IEC 112
Copyright © lookpolymers.com All Rights Reserved