- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- PolyOne Edgetek® PE-40MC/000 High Density Polyethylene (HDPE) (discontinued **)
PolyOne Edgetek® PE-40MC/000 High Density Polyethylene (HDPE) (discontinued **)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® PE-40MC/000 High Density Polyethylene (HDPE)
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description/Features:Mica FilledInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.304 g/cc | 1.304 g/cc | ASTM D792 |
| Water Absorption | 0.010 % @Thickness 3.17 mm |
0.010 % @Thickness 0.125 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0060 - 0.0070 cm/cm | 0.0060 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 34.5 MPa | 5000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 7.0 % | 7.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 1.72 GPa | 250 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 34.5 MPa | 5000 psi | ASTM D790 |
| Flexural Modulus | 1.72 GPa | 250 ksi | ASTM D790 |
| Izod Impact, Notched | 0.961 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
1.80 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved