Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Premix Premi-Glas® 1201-15 Polyester SMC

Category Polymer , Thermoset , Composite SMC , Polyester, TS , Thermoset Polyester Glass SMC
Manufacturer Premix
Trade Name Premi-Glas®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Premix Premi-Glas® 1201-15 Polyester SMC.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Premi-Glas® 1201-15 is a 15% glass reinforced thermoset Sheet Molding Compound designed for sinks, shower stall bases and wall applications. Key features and benefits are:Supports ANSI 124.2 and CSA B45.5 requirements for flame, smoke and stain resistance. Available in glass contents ranging from 10% - 20%; standard product has 15% reinforcement. High gloss, non-rippling surface appearance on large flat surfaces and deep draw side walls. Excellent as-molded dimensional tolerances. Outstanding moldability and flow in compression process. Standard color is white.Passes ANSI 124.2/ CSA B,45.5 stain resistanceData provided by Premix.
Physical Properties Metric English Comments
Specific Gravity 1.76 g/cc
1.76 g/cc
Linear Mold Shrinkage 0.0020 cm/cm
0.0020 in/in
Polymerization Shrinkage
Mechanical Properties Metric English Comments
Tensile Strength 35.0 MPa
5080 psi
ASTM D638
Tensile Modulus 9.00 GPa
1310 ksi
ASTM D638
Flexural Strength 90.0 MPa
13100 psi
ASTM D790
Flexural Modulus 9.00 GPa
1310 ksi
ASTM D790
Poissons Ratio 0.30
0.30
Shear Modulus 3.50 GPa
508 ksi
Calculated
Izod Impact, Notched 3.70 J/cm
6.93 ft-lb/in
ASTM D256
Izod Impact, Unnotched 4.25 J/cm
7.96 ft-lb/in
ASTM D4812
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 35.0 µm/m-°C
19.4 µin/in-°F
Z Direction
CTE, linear, Transverse to Flow 25.0 µm/m-°C
13.9 µin/in-°F
XY Direction
Thermal Conductivity 0.300 W/m-K
2.08 BTU-in/hr-ft²-°F
Processing Properties Metric English Comments
Processing Temperature 150 °C
302 °F
Compression Molding
Clamp Pressure 3.45 - 6.89 MPa
500 - 1000 psi
Molding Pressure
Descriptive Properties Value Comments
Flame Resistance pass at 3 mm
ANSI Z124.2
Stain Resistance pass
ANSI Z124.2
Copyright © lookpolymers.com All Rights Reserved