Premix Premi-Glas® 1201-20 Fiberglass Reinforced Thermoset SMC

Category	Polymer , Thermoset , Composite SMC , Filled/Reinforced Thermoset
Manufacturer	Premix
Trade Name	Premi-Glas®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Premi-Glas® 1201-20 Fiberglass Reinforced Thermoset SMC.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Premi-Glas® 1201-20 is a fiberglass reinforced thermoset sheet molding compound for sanitary ware applications such as shower bases and surrounds, bathtubs and vanity tops.Key features and benefits are:Supports ANSI Z124.2 and CSA B45.5 requirementsHigh gloss surface appearance with minimal rippling on deep drawsExcellent as-molded dimensional tolerancesOutstanding moldability and flow in compression molding processesStandard colors are white and boneDesigned for compression molding in matched metal die molds.Information provided by Premix.

Physical Properties	Metric	English	Comments
Specific Gravity	1.76 g/cc	1.76 g/cc
Linear Mold Shrinkage	0.0020 cm/cm	0.0020 in/in	Polymerization Shrinkage

Mechanical Properties	Metric	English	Comments
Tensile Strength	45.0 MPa	6530 psi	ASTM D638
Tensile Modulus	10.0 GPa	1450 ksi	ASTM D638
Flexural Strength	128 MPa	18600 psi	ASTM D790
Flexural Modulus	10.0 GPa	1450 ksi	ASTM D790
Poissons Ratio	0.30	0.30
Shear Modulus	3.80 GPa	551 ksi	Calculated
Izod Impact, Notched	5.30 J/cm	9.93 ft-lb/in	ASTM D256
Izod Impact, Unnotched	7.00 J/cm	13.1 ft-lb/in	ASTM D4812

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	35.0 µm/m-°C	19.4 µin/in-°F	Z Direction
CTE, linear, Transverse to Flow	25.0 µm/m-°C	13.9 µin/in-°F	XY Direction
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F

Processing Properties	Metric	English	Comments
Processing Temperature	150 °C	302 °F	Compression Molding
Clamp Pressure	3.45 - 6.89 MPa	500 - 1000 psi	Molding Pressure

Descriptive Properties	Value	Comments
Flame Resistance	pass at 3 mm	ANSI Z124.2
Stain Resistance	pass	ANSI Z124.2

Users viewing this material also viewed the following: