POLYMER SEARCH

Quadrant EPP Quadrant PC 1000 extruded (ISO Data)

Category	Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Extruded
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Quadrant PC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Quadrant PC 1000 extruded (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Quadrant Engineering Plastic Products is marketing non-UV-stabilized polycarbonate stock shapes under the trade name Quadrant PC 1000. It is a natural, “non-optical” industrial quality (clear, translucent). High mechanical strength Good creep resistance Very high impact strength, even at low temperatures Stiffness retention over a wide range of temperatures Very good dimensional stability (very low water absorption and low coefficient of linear thermal expansion) Natural colour (clear, translucent) Good electrical insulating and dielectric properties Physiologically inert (suitable for food contact) Economical thermal performance

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.15 %	0.15 %	50% RH
Water Absorption at Saturation	0.40 %	0.40 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	75	75	ISO 2039-2
Hardness, Shore D	79	79
Ball Indentation Hardness	120 MPa	17400 psi	ISO 2039-1
Tensile Strength	74.0 MPa	10700 psi	at Yield; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	6.0 %	6.0 %	ISO 527-1/-2
Tensile Modulus	2.40 GPa	348 ksi	ISO 527-1/-2
Flexural Strength	103 MPa	14900 psi
Flexural Modulus	2.175 GPa	315.5 ksi
Compressive Strength	21.0 MPa @Strain 1 %	3050 psi @Strain 1 %	ISO 604
	40.0 MPa @Strain 2 %	5800 psi @Strain 2 %	ISO 604
	80.0 MPa @Strain 5 %	11600 psi @Strain 5 %	ISO 604
K Factor (ISO)	60 µm/km	60 µm/km
Charpy Impact Unnotched	NB	NB	ISO 179-1/1eU
Charpy Impact, Notched	0.900 J/cm²	4.28 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.50 - 0.60	0.50 - 0.60

Thermal Properties	Metric	English	Comments
CTE, linear	65.0 µm/m-°C @Temperature 23.0 - 100 °C	36.1 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.210 W/m-K	1.46 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	120 °C	248 °F	Continuous; 20,000 h
	130 °C	266 °F	Continuous; 5,000 h
Deflection Temperature at 1.8 MPa (264 psi)	130 °C	266 °F	ISO 75-1/-2
Glass Transition Temp, Tg	150 °C	302 °F	DSC, 20°C/min.; ISO 11357-1/-2
Flammability, UL94	HB	HB
Oxygen Index	25 %	25 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Constant	3.0 @Frequency >=100000 Hz	3.0 @Frequency >=100000 Hz	IEC 60250
Dielectric Strength	28.0 kV/mm	711 kV/in
Dissipation Factor	0.0010 @Frequency 100000 Hz	0.0010 @Frequency 100000 Hz	IEC 60250
Comparative Tracking Index	350 V	350 V	IEC 60112

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	Yes	Yes
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Unacceptable	Unacceptable
Acids, Weak	Limited	Limited
Alcohols	Limited	Limited
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Unacceptable	Unacceptable
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Unacceptable	Unacceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Unacceptable	Unacceptable

Users viewing this material also viewed the following: