SABIC Innovative Plastics LNP STAT-LOY K3000Z Acetal

Category	Polymer , Thermoplastic , Acetal (POM)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP Stat-loy
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP STAT-LOY K3000Z Acetal.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* STAT-LOY* K3000Z is a compound based on unfilled Acetal resin. Added feature of this material is: Antistat.

Physical Properties	Metric	English	Comments
Density	1.32 g/cc	0.0477 lb/inÂ³	ASTM D792
	1.33 g/cc	0.0480 lb/inÂ³	ISO 1183
Moisture Absorption	2.29 %	2.29 %	50% RH, 24 hrs; ASTM D570
	4.28 %	4.28 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.018 cm/cm @Time 86400 sec	0.018 in/in @Time 24.0 hour	ASTM D955
	0.0181 cm/cm @Time 86400 sec	0.0181 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.018 cm/cm @Time 86400 sec	0.018 in/in @Time 24.0 hour	ASTM D955
	0.0183 cm/cm @Time 86400 sec	0.0183 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	32.0 MPa	4640 psi	ASTM D638
	36.0 MPa	5220 psi	ISO 527
Tensile Strength, Yield	41.0 MPa	5950 psi	ASTM D638
	41.0 MPa	5950 psi	ISO 527
Elongation at Break	49.2 %	49.2 %	ISO 527
	59.5 %	59.5 %	ASTM D638
Elongation at Yield	13.3 %	13.3 %	ISO 527
	15.8 %	15.8 %	ASTM D638
Tensile Modulus	1.50 GPa	218 ksi	1 mm/min; ISO 527
	1.59 GPa	231 ksi	50 mm/min; ASTM D638
Flexural Strength	40.0 MPa	5800 psi	ISO 178
	49.0 MPa	7110 psi	ASTM D790
Flexural Modulus	1.44 GPa	209 ksi	ASTM D790
	1.50 GPa	218 ksi	ISO 178
Izod Impact, Notched	NB	NB	ASTM D256
Izod Impact, Unnotched	NB	NB	ASTM D4812
Izod Impact, Notched (ISO)	15.0 kJ/mÂ²	7.14 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	NB	NB	80104; ISO 180/1U
Dart Drop, Total Energy	28.0 J	20.7 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	16.0 J	11.8 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.42	0.42	ASTM D3702 Modified
Coefficient of Friction, Static	0.25	0.25	ASTM D3702 Modified
K (wear) Factor	28.2 x 10^-8 mmÂ³/N-M	14.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	130 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	72.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	130 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	72.2 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	133 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	73.9 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	133 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	73.9 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	146 Â°C @Thickness 3.20 mm	295 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	67.0 Â°C @Thickness 3.20 mm	153 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Electrical Properties	Metric	English	Comments
Surface Resistance	1.00e+9 - 1.00e+11 ohm	1.00e+9 - 1.00e+11 ohm	ASTM D257

Users viewing this material also viewed the following: