- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethersulfone (PES)
- SABIC Innovative Plastics LNP THERMOCOMP JF006 PES
SABIC Innovative Plastics LNP THERMOCOMP JF006 PES
| Category | Polymer , Thermoplastic , Polyethersulfone (PES) |
| Manufacturer | SABIC Innovative Plastics (GE Plastics) |
| Trade Name | LNP THERMOCOMP |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SABIC Innovative Plastics LNP THERMOCOMP JF006 PES.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
LNP* THERMOCOMP* JF006 is a compound based on Polyethersulfone resin containing 30% Glass Fiber.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.58 g/cc | 0.0571 lb/in³ | ISO 1183 |
| 1.584 g/cc | 0.05723 lb/in³ | ASTM D792 | |
| Moisture Absorption | 0.340 % | 0.340 % | 50% RH, 24 hrs; ASTM D570 |
| 0.460 % | 0.460 % | 23°C / 50% RH; ISO 62 | |
| Linear Mold Shrinkage, Flow | 0.0027 cm/cm @Time 86400 sec |
0.0027 in/in @Time 24.0 hour |
ISO 294 |
| 0.0030 cm/cm @Time 86400 sec |
0.0030 in/in @Time 24.0 hour |
ASTM D955 | |
| Linear Mold Shrinkage, Transverse | 0.0048 cm/cm @Time 86400 sec |
0.0048 in/in @Time 24.0 hour |
ISO 294 |
| 0.0050 cm/cm @Time 86400 sec |
0.0050 in/in @Time 24.0 hour |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 136 MPa | 19700 psi | ISO 527 |
| 142 MPa | 20600 psi | ASTM D638 | |
| Elongation at Break | 2.1 % | 2.1 % | ISO 527 |
| 2.2 % | 2.2 % | ASTM D638 | |
| Tensile Modulus | 9.45 GPa | 1370 ksi | 1 mm/min; ISO 527 |
| 10.75 GPa | 1559 ksi | 50 mm/min; ASTM D638 | |
| Flexural Strength | 207 MPa | 30000 psi | ISO 178 |
| 210 MPa | 30500 psi | ASTM D790 | |
| Flexural Modulus | 9.72 GPa | 1410 ksi | ASTM D790 |
| 10.0 GPa | 1450 ksi | ISO 178 | |
| Izod Impact, Notched | 0.960 J/cm | 1.80 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 6.14 J/cm | 11.5 ft-lb/in | ASTM D4812 |
| Izod Impact, Notched (ISO) | 9.00 kJ/m² | 4.28 ft-lb/in² | 80*10*4; ISO 180/1A |
| Izod Impact, Unnotched (ISO) | 40.0 kJ/m² | 19.0 ft-lb/in² | 80*10*4; ISO 180/1U |
| Dart Drop, Total Energy | 10.0 J | 7.38 ft-lb | Instrumented Impact Energy @ peak; ASTM D3763 |
| Impact Test | 4.00 J | 2.95 ft-lb | Multiaxial Impact; ISO 6603 |
| Coefficient of Friction, Dynamic | 0.52 | 0.52 | ASTM D3702 Modified |
| Coefficient of Friction, Static | 0.57 | 0.57 | ASTM D3702 Modified |
| K (wear) Factor | 342 x 10-8 mm³/N-M | 170 x 10-10 in³-min/ft-lb-hr | Washer; ASTM D3702 Modified |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 30.6 µm/m-°C @Temperature -40.0 - 40.0 °C |
17.0 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| 31.1 µm/m-°C @Temperature -40.0 - 40.0 °C |
17.3 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |
| CTE, linear, Transverse to Flow | 36.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
20.0 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| 37.3 µm/m-°C @Temperature -40.0 - 40.0 °C |
20.7 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 210 °C @Thickness 3.20 mm |
410 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
Users viewing this material also viewed the following:
- Shakespeare CL-10XT Super Tough Nylon Copolymer Fishing Line, 10 lb
- SABIC Innovative Plastics LNP Thermocomp RF006EU PA 66 (Europe-Africa-Middle East)
- A. Schulman POLYFORT™ PP 3702 Clarified Copolymer Polypropylene
- ThyssenKrupp XAR® 450 Structural Steel
- Polyram Polytron P60B04 Homopolymer Polypropylene, Chemically Coupled 60% Long Glass Fiber
- Zeon Chemicals HyTemp® 4052 AR Polyacrylate Elastomer
- Zotefoams Plastazote® LD24FMSV Low Density Polyethylene Foam, Flame Retarded
- Unitika ET2025 PA6, Conditioned
- Chesterton OPTICOOL™ 970 Synthetic Fluid
- Chosun Refractories SM-1 Special Mortar
Copyright © lookpolymers.com All Rights Reserved