Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics NORYL PPX PPX7110 PPE+PP (Europe-Africa-Middle East)

Category Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polypropylene (PP)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name Noryl PPX
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics NORYL PPX PPX7110 PPE+PP (Europe-Africa-Middle East).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PPX7110 is an alloy of PP and PPO, providing high impact and good heat resistance. Generic identification acc. ISO11469: >PP+PPE+PS-I
Physical Properties Metric English Comments
Density 0.970 g/cc
0.0350 lb/in³
ISO 1183
Melt Index of Compound 11 g/10 min

@Load 5.00 kg,
Temperature 260 °C
 11 g/10 min

@Load 11.0 lb,
Temperature 500 °F
 MVR [cm^3/10 min]; ISO 1133
Mechanical Properties Metric English Comments
Hardness, H358/30 65.0 MPa
9430 psi
ISO 2039-1
Tensile Strength at Break 30.0 MPa
4350 psi
5 mm/min; ISO 527
Tensile Strength, Yield 34.0 MPa
4930 psi
5 mm/min; ISO 527
Elongation at Break 195 %
195 %
5 mm/min; ISO 527
Elongation at Yield 6.0 %
6.0 %
5 mm/min; ISO 527
Tensile Modulus 1.50 GPa
218 ksi
1 mm/min; ISO 527
Flexural Yield Strength 50.0 MPa
7250 psi
2 mm/min; ISO 178
Flexural Modulus 1.70 GPa
247 ksi
2 mm/min; ISO 178
Izod Impact, Notched (ISO) 25.0 kJ/m²
11.9 ft-lb/in²
80*10*4; ISO 180/1A
9.00 kJ/m²

@Temperature -30.0 °C
 4.28 ft-lb/in²

@Temperature -22.0 °F
 80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) NB
NB
80*10*4; ISO 180/1U
NB

@Temperature -30.0 °C
 NB

@Temperature -22.0 °F
 80*10*4; ISO 180/1U
Charpy Impact Unnotched NB
NB
Edgew 80*10*4 sp=62mm; ISO 179/1eU
3.80 J/cm²

@Temperature -30.0 °C
 18.1 ft-lb/in²

@Temperature -22.0 °F
 Edgew 80*10*4 sp=62mm; ISO 179/1eU
Charpy Impact, Notched 2.50 J/cm²
11.9 ft-lb/in²
Edgew 80*10*4 sp=62mm; ISO 179/1eA
0.500 J/cm²

@Temperature -30.0 °C
 2.38 ft-lb/in²

@Temperature -22.0 °F
 Edgew 80*10*4 sp=62mm; ISO 179/1eA
Taber Abrasion, mg/1000 Cycles 75
75
CS-17, 1 kg; SABIC Method
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 90.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
 50.0 µin/in-°F

@Temperature 73.4 - 140 °F
 ISO 11359-2
CTE, linear, Transverse to Flow 120 µm/m-°C

@Temperature 23.0 - 60.0 °C
 66.7 µin/in-°F

@Temperature 73.4 - 140 °F
 ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi) 108 °C
226 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi) 75.0 °C
167 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point 95.0 °C
203 °F
Rate B/50; ISO 306
100 °C
212 °F
Rate B/120; ISO 306
Glow Wire Test 650 °C

@Thickness 3.20 mm
 1200 °F

@Thickness 0.126 in
 IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
ROA; IEC 60093
Dielectric Constant 2.2

@Frequency 1.00e+6 Hz
 2.2

@Frequency 1.00e+6 Hz
 IEC 60250
2.2

@Frequency 50.0 - 60.0 Hz
 2.2

@Frequency 50.0 - 60.0 Hz
 IEC 60250
Dielectric Strength 22.0 kV/mm

@Thickness 3.20 mm
 559 kV/in

@Thickness 0.126 in
 in oil; IEC 60243-1
Dissipation Factor 0.00060

@Frequency 50.0 - 60.0 Hz
 0.00060

@Frequency 50.0 - 60.0 Hz
 IEC 60250
0.00060

@Frequency 1.00e+6 Hz
 0.00060

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved