- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- SIDPEC EGYPTENE® HD 5740 UA HDPE Injection Molding
SIDPEC EGYPTENE® HD 5740 UA HDPE Injection Molding
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | SIDPEC (Sidi Kerir Petrochemicals Co.) |
| Trade Name | EGYPTENE® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SIDPEC EGYPTENE® HD 5740 UA HDPE Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications:Large dustbins and pailsPallet boxesFish cratesTechnical moldingInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.957 g/cc | 0.0346 lb/in³ | ISO 1872/1 |
| ESCR, Bottle | >= 50 hour @Temperature 23.0 °C |
>= 50 hour @Temperature 73.4 °F |
F<sub>50</sub>; ASTM D1693 |
| Melt Flow | 4.0 g/10 min @Load 2.16 kg |
4.0 g/10 min @Load 4.76 lb |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 27.0 MPa | 3920 psi | BP 13B/1 |
| Elongation at Break | 1000 % | 1000 % | BP 13B/1 |
| Flexural Modulus | 1.25 GPa | 181 ksi | ISO 178-1975 |
| Charpy Impact, Notched | 1.00 J/cm² | 4.76 ft-lb/in² | ISO 179 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved