- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Mineral Reinforced
- SPS Guang Zhou FILLMAâ„¢ 5002F30B Mineral Filled Polypropylene
SPS Guang Zhou FILLMAâ„¢ 5002F30B Mineral Filled Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Mineral Reinforced |
| Manufacturer | SPS Guang Zhou |
| Trade Name | FILLMA™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SPS Guang Zhou FILLMAâ„¢ 5002F30B Mineral Filled Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Characteristic: 30%wt of Sulfate Barium filled, high gloss, high heat resistanceApplications: Household appliance partsInformation Provided by SPS (Guang Zhou) Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc | ASTM D792 |
| Melt Flow | 16 g/10 min | 16 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
| Flexural Strength | 45.0 MPa | 6530 psi | |
| Flexural Modulus | 2.20 GPa | 319 ksi | |
| Izod Impact, Notched | 0.600 J/cm | 1.12 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 130 °C | 266 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
Users viewing this material also viewed the following:
- MV Labs CO735 [Co(C2H8N2)3](NO3)3 Tris(ethylenediamine)cobalt(III) nitrate
- Nye Lubricants PG-2S Grease
- PSM Industries PolyAlloys MIM-17-4 PH Heat Treated Stainless Steel
- Covestro Apec® DP9-9354 High-Heat Polycarbonate, Flame-Retardant (discontinued **)
- Heatbath/Park #900 High Speed Hardening Salt
- CeramTec Sonox® P41 Piezoceramic
- CMW® 3000 AMS-T-21014 AMS-7725 High Density Machinable Tungsten
- DuPont Performance Polymers Kalrez® 4079AMS FFKM Perfluoroelastomer
- 3M 9085UV Ultra High Temperature 100 HT Adhesive Transfer Tape
- Denka VINYKON M2012 PVC, M grade for hard injection molding
Copyright © lookpolymers.com All Rights Reserved