Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Specialty Polymers Ajediumâ„¢ PVDF 9009 Polyvinylidene Fluoride (PVDF)

Category Polymer , Film , Thermoplastic , Fluoropolymer , PVDF , Polyvinylidinefluoride (PVDF), Molded/Extruded
Manufacturer Solvay Specialty Polymers
Trade Name Ajedium™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Specialty Polymers Ajediumâ„¢ PVDF 9009 Polyvinylidene Fluoride (PVDF).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Solef® 9009 PVDF homopolymer is a semi-crystalline fluoropolymer. Solef® film is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents and alcohols.Features: HomopolymerAdditional Properties: Area Factor - 108 ft²/lb/milInformation provided by Solvay Specialty Polymers.
Physical Properties Metric English Comments
Density 1.75 - 1.80 g/cc
0.0632 - 0.0650 lb/in³
ASTM D792
Water Absorption <= 0.040 %

@Time 86400 sec
<= 0.040 %

@Time 24.0 hour
ISO 62
Thickness 25.0 microns
0.984 mil
As Tested
Mechanical Properties Metric English Comments
Film Tensile Strength at Yield, MD 55.0 MPa
7980 psi
ASTM D882
Film Tensile Strength at Yield, TD 56.0 MPa
8120 psi
ASTM D882
Film Elongation at Break, MD 200 %
200 %
ASTM D882
Film Elongation at Break, TD 250 %
250 %
ASTM D882
Film Elongation at Yield, MD 6.0 %
6.0 %
ASTM D882
Film Elongation at Yield, TD 6.2 %
6.2 %
ASTM D882
Secant Modulus, MD 2.00 GPa
290 ksi
ASTM D882
Secant Modulus, TD 2.10 GPa
305 ksi
ASTM D882
Coefficient of Friction, Dynamic 0.15 - 0.35
0.15 - 0.35
vs. Itself; ASTM D1894
Coefficient of Friction, Static 0.20 - 0.40
0.20 - 0.40
vs. Itself; ASTM D1894
Taber Abrasion, mg/1000 Cycles 5.0 - 10
5.0 - 10
CS-10 Wheel, 1000 g; ASTM D1044
Film Tensile Strength at Break, MD 57.0 MPa
8270 psi
ASTM D882
Film Tensile Strength at Break, TD 54.0 MPa
7830 psi
ASTM D882
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 140 µm/m-°C
77.8 µin/in-°F
Specific Heat Capacity 1.60 J/g-°C

@Temperature 100 °C
0.382 BTU/lb-°F

@Temperature 212 °F
ASTM C351
Thermal Conductivity 0.200 W/m-K
1.39 BTU-in/hr-ft²-°F
ASTM C177
Melting Point 162 - 168 °C
324 - 334 °F
DSC
Crystallization Temperature 133 - 140 °C
271 - 284 °F
Peak; ASTM D3418
Glass Transition Temp, Tg -40.0 °C
-40.0 °F
ASTM E1356
Oxygen Index 44 %

@Thickness 3.00 mm
44 %

@Thickness 0.118 in
ASTM D2863
Shrinkage 0.70 %

@Temperature 130 °C
0.70 %

@Temperature 266 °F
Free Shrinkage; ASTM D2732
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+14 ohm-cm
>= 1.00e+14 ohm-cm
ASTM D257
Surface Resistance >= 1.00e+14 ohm
>= 1.00e+14 ohm
ASTM D257
Dielectric Constant 7.5
7.5
ASTM D150
Dielectric Strength 20.0 - 25.0 kV/mm

@Thickness 1.00 mm
508 - 635 kV/in

@Thickness 0.0394 in
ASTM D149
Descriptive Properties Value Comments
Availability Asia Pacific
Europe
Latin America
North America
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved