- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphthalamide (PPA)
- Polyphthalamide (PPA), 30% Glass Fiber Reinforced
- Solvay Specialty Polymers Amodel® AT-1125 HS Polyphthalamide (PPA) (Unverified Data**)
Solvay Specialty Polymers Amodel® AT-1125 HS Polyphthalamide (PPA) (Unverified Data**)
| Category | Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 30% Glass Fiber Reinforced |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Amodel® AT-1125 HS Polyphthalamide (PPA)
(Unverified Data**).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Amodel AT-1125 HS polyphthalamide (PPA) is a toughened, heat stabilized 25% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional stability, chemical resistance and ductility. This resin has a high heat deflection temperature and a high flexural modulus, with greater tensile elongation than untoughened glass-reinforced PPA. Typical applications include bearings, bearing retainers/cages, housings, chemical processing equipment components, motor frames, sporting equipment, lawn and garden equipment and components that require press-fit or snap-fit assembly. - Black: AT-1125 HS BK 324 - Natural: AT-1125 HS NTData is presented for dry polymer unless noted as 'conditioned'.Information provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.35 g/cc | 0.0488 lb/in³ | ISO 1183/A |
| Filler Content | 25 % | 25 % | Glass Fiber Reinforcement |
| Water Absorption | 0.20 % @Time 86400 sec |
0.20 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm | 0.0060 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 174 MPa | 25200 psi | ASTM D638 |
| 190 MPa | 27600 psi | ISO 527-2 | |
| Elongation at Break | 2.5 % | 2.5 % | ISO 527-2 |
| 3.2 % | 3.2 % | ASTM D638 | |
| Tensile Modulus | 8.48 GPa | 1230 ksi | ASTM D638 |
| 8.89 GPa | 1290 ksi | ISO 527-2 | |
| Flexural Strength | 240 MPa | 34800 psi | ISO 178 |
| Flexural Yield Strength | 200 MPa | 29000 psi | Conditioned; ASTM D790 |
| 255 MPa | 37000 psi | ASTM D790 | |
| Flexural Modulus | 7.58 GPa | 1100 ksi | ASTM D790 |
| 7.58 GPa | 1100 ksi | Conditioned; ASTM D790 | |
| 7.79 GPa | 1130 ksi | ISO 178 | |
| Izod Impact, Notched | 0.850 J/cm | 1.59 ft-lb/in | Conditioned; ASTM D256 |
| 1.20 J/cm | 2.25 ft-lb/in | ASTM D256 | |
| 8.00 J/cm | 15.0 ft-lb/in | Conditioned; ASTM D256 | |
| 11.0 J/cm | 20.6 ft-lb/in | ASTM D256 | |
| Izod Impact, Notched (ISO) | 8.80 kJ/m² | 4.19 ft-lb/in² | ISO 180/1A |
| Charpy Impact, Notched | 0.880 J/cm² | 4.19 ft-lb/in² | ISO 179/1eA |
| Dart Drop, Total Energy | 9.36 J | 6.90 ft-lb | Conditioned; ASTM D3763 |
| 13.8 J | 10.2 ft-lb | ASTM D3763 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 311 °C | 592 °F | Peak; ASTM D3418 |
| 311 °C | 592 °F | ISO 11357-3 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 279 °C | 534 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 235 °C | 455 °F | Unannealed; ASTM D648 |
| 280 °C | 536 °F | Unannealed; ISO 75-2/A |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 79.4 °C | 175 °F | Hopper Temperature |
| Rear Barrel Temperature | 304 - 318 °C | 579 - 604 °F | |
| Front Barrel Temperature | 316 - 329 °C | 601 - 624 °F | |
| Melt Temperature | 321 - 343 °C | 610 - 649 °F | |
| Mold Temperature | 135 °C | 275 °F | |
| Drying Temperature | 121 °C | 250 °F | |
| Dry Time | 4.00 hour | 4.00 hour | |
| Moisture Content | 0.10 % | 0.10 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Additive | Heat Stabilizer | |
| Impact Modifier | ||
| Appearance | Black | |
| Natural Color | ||
| Automotive Specifications | ASTM D4000 PA123 G25 | |
| ASTM D4000 PPA0111 G25 KD160 KN075 LD002 PN080 YI250 | ||
| ASTM D6779 PA123G25 | ||
| ISO 1874 PA6T/6I/66-HI, MH, 12-080, GF25 | ||
| Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America | ||
| Features | Good Chemical Resistance | |
| Good Dimensional Stability | ||
| Heat Stabilized | ||
| High Heat Resistance | ||
| Impact Modified | ||
| Forms | Pellets | |
| Generic | PPA | |
| Processing Method | Injection Molding | |
| RoHS Compliance | RoHS Compliant | |
| Uses | Appliance Components | |
| Appliances | ||
| Automotive Applications | ||
| Automotive Electronics | ||
| Automotive Under the Hood | ||
| Bearings | ||
| Connectors | ||
| Fuel Lines | ||
| General Purpose | ||
| Housings | ||
| Industrial Applications | ||
| Industrial Parts | ||
| Lawn and Garden Equipment | ||
| Machine/Mechanical Parts | ||
| Metal Replacement |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved