Solvay Specialty Polymers Amodel® AT-5001 Polyphthalamide (PPA) Resin, Dry as Molded (discontinued **)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® AT-5001 Polyphthalamide (PPA) Resin, Dry as Molded (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AMODEL AT-5001 polyphthalamide resin is a neat ductile material that offers superior retention of properties after humid thermal aging, high impact at low temperature, and better mechanical properties than many unreinforced thermoplastic polyester and nylon resins especially after exposure to humid environments. These materials were specifically designed for automotive electrical and electronic applications such as connectors, sockets, and sensors. Additional applications include fuel systems where both the high elongation/ductility and superior low permeation performance to automotive fuels are needed. They can be processed readily using conventional injection molding equipment and methods.Information provided by Solvay Advanced Polymers

Physical Properties	Metric	English	Comments
Specific Gravity	1.10 g/cc	1.10 g/cc	ISO 1183A
	1.10 g/cc	1.10 g/cc	ASTM D792
Moisture Absorption at Equilibrium	0.50 %	0.50 %	24 hours; ASTM D570
Linear Mold Shrinkage	0.020 cm/cm	0.020 in/in	93°C; ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	53.0 MPa	7690 psi	ISO 527
Tensile Strength, Yield	57.0 MPa	8270 psi	ISO 527
	61.0 MPa	8850 psi	ASTM D638
Elongation at Break	15 %	15 %	ISO 527
Elongation at Yield	5.0 %	5.0 %	ISO 527
	30 %	30 %	ASTM D638
Tensile Modulus	2.30 GPa	334 ksi	ASTM D638
	2.30 GPa	334 ksi	ISO 527
	0.500 GPa @Temperature 100 °C	72.5 ksi @Temperature 212 °F	ISO 527
Flexural Strength	65.0 MPa	9430 psi	ISO 178
	92.0 MPa	13300 psi	ASTM D790
	9.00 MPa @Temperature 100 °C	1310 psi @Temperature 212 °F	ISO 178
Flexural Modulus	1.80 GPa	261 ksi	ISO 178
	2.10 GPa	305 ksi	ASTM D790
	0.400 GPa @Temperature 100 °C	58.0 ksi @Temperature 212 °F	ISO 178
Shear Strength	53.0 MPa	7690 psi	ASTM D732
Izod Impact, Notched	1.60 J/cm	3.00 ft-lb/in	ASTM D256
Izod Impact, Unnotched	NB	NB	ASTM D4812
Izod Impact, Notched (ISO)	14.0 kJ/m²	6.66 ft-lb/in²	ISO 180/1A
Izod Impact, Unnotched (ISO)	NB	NB	ISO 180/1U
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
Charpy Impact, Notched	NB	NB	ISO 179/1eA
Dynatup @ -18°C	54.0 J	39.8 ft-lb	Total Energy. Dry as molded. No temperature indicated.; D3763
Dynatup @ -18°C Max Load	454000 g	1000 lb	No temperature indicated.; D3763

Thermal Properties	Metric	English	Comments
CTE, linear	94.0 µm/m-°C @Temperature 0.000 - 800 °C	52.2 µin/in-°F @Temperature 32.0 - 1470 °F
Melting Point	300 °C	572 °F	ISO 11357-3
	300 °C	572 °F	ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	88.0 °C	190 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	84.0 °C	183 °F	ISO 75Af
	185 °C	365 °F	ASTM D648
Flammability, UL94	HB	HB
Shrinkage	1.9 %	1.9 %

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.90e+15 ohm-cm	3.90e+15 ohm-cm	ASTM D257
Surface Resistance	3.80e+15 ohm	3.80e+15 ohm	ASTM D257
Dielectric Constant	3.2 @Frequency 60 Hz	3.2 @Frequency 60 Hz	ASTM D150
	3.2 @Frequency 1e+6 Hz	3.2 @Frequency 1e+6 Hz	ASTM D150
Dielectric Strength	17.0 kV/mm	432 kV/in	ASTM D149
Dissipation Factor	0.0040 @Frequency 60 Hz	0.0040 @Frequency 60 Hz	ASTM D150
	0.016 @Frequency 1e+6 Hz	0.016 @Frequency 1e+6 Hz	ASTM D150
Comparative Tracking Index	>= 600 V	>= 600 V	ASTM D3638
High Voltage Arc-Tracking Rate, HVTR	4.20 mm/min	0.165 in/min	UL 746A

Users viewing this material also viewed the following: