- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyketone
- Polyetheretherketone (PEEK)
- Polyetheretherketone, PEEK, Glass Fiber Filled
- Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK), 30% Glass Fiber
Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK), 30% Glass Fiber
| Category | Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) , Polyetheretherketone, PEEK, Glass Fiber Filled |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | KetaSpire® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers KetaSpire® KT-880 GF30 Polyetheretherketone (PEEK), 30% Glass Fiber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KetaSpire® KT-880 GF30 is the high-flow, 30% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire® PEEK resin. Reinforcement also affords greater mechanical robustness in structural applications, particularly those with service temperatures approaching 300°C.Features: Autoclave Sterilizable; Biocompatible; E-beam Sterilizable; Ethylene Oxide Sterilizable; Fatigue Resistant; Flame Retardant; Good Chemical Resistance; Good Dimensional Stability; Good Sterilizability; Heat Sterilizable; High Flow; High Heat Resistance; High Stiffness; High Strength; Radiation (Gamma) Resistant; Radiation Sterilizable; Radiotranslucent; Steam Resistant; Steam SterilizableUses: Aircraft Applications; Connectors; Dental Applications; Electrical/Electronic Applications; Film; Hospital Goods; Industrial Applications; Medical Devices; Medical/Healthcare Applications; Oil/Gas Applications; Pump Parts; Seals; Surgical InstrumentsInformation provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.53 g/cc | 0.0553 lb/in³ | ASTM D792 |
| Filler Content | 30 % | 30 % | Glass Fiber |
| Water Absorption | 0.10 % @Time 86400 sec |
0.10 % @Time 24.0 hour |
ISO 62 |
| Viscosity | 350000 cP @Shear Rate 1000 1/s, Temperature 400 °C |
350000 cP @Shear Rate 1000 1/s, Temperature 752 °F |
Melt Viscosity; ASTM D3835 |
| Linear Mold Shrinkage, Flow | 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm |
0.0010 - 0.0030 in/in @Thickness 0.125 in |
|
| Linear Mold Shrinkage, Transverse | 0.013 - 0.015 cm/cm @Thickness 3.18 mm |
0.013 - 0.015 in/in @Thickness 0.125 in |
ASTM D955 |
| Melt Flow | 14 g/10 min @Load 2.16 kg, Temperature 400 °C |
14 g/10 min @Load 4.76 lb, Temperature 752 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 105 | 105 | ASTM D785 |
| Tensile Strength | 162 MPa | 23500 psi | ASTM D638 |
| Tensile Strength, Yield | 174 MPa | 25200 psi | 5 mm/min, Type 1A; ISO 527-2 |
| Elongation at Break | 2.8 % | 2.8 % | Type 1A, 5 mm/min; ISO 527-2 |
| 2.8 % | 2.8 % | 5 mm/min; ASTM D638 | |
| Tensile Modulus | 10.8 GPa | 1570 ksi | 5 mm/min; ASTM D638 |
| 11.2 GPa | 1620 ksi | ISO 527-2 | |
| Flexural Strength | 239 MPa | 34700 psi | ISO 178 |
| 260 MPa | 37700 psi | ASTM D790 | |
| Flexural Modulus | 10.5 GPa | 1520 ksi | ASTM D790 |
| 10.6 GPa | 1540 ksi | ISO 178 | |
| Compressive Strength | 183 MPa | 26500 psi | ASTM D695 |
| Shear Strength | 94.4 MPa | 13700 psi | ASTM D732 |
| Izod Impact, Notched | 0.960 J/cm | 1.80 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 8.50 J/cm | 15.9 ft-lb/in | ASTM D256 |
| Izod Impact, Notched (ISO) | 11.0 kJ/m² | 5.23 ft-lb/in² | ISO 180 |
| Izod Impact, Unnotched (ISO) | 62.0 kJ/m² | 29.5 ft-lb/in² | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 19.0 µm/m-°C @Temperature -50.0 - 50.0 °C |
10.6 µin/in-°F @Temperature -58.0 - 122 °F |
1 |
| Specific Heat Capacity | 1.28 J/g-°C @Temperature 50.0 °C |
0.306 BTU/lb-°F @Temperature 122 °F |
ASTM C351 |
| 1.70 J/g-°C @Temperature 200 °C |
0.406 BTU/lb-°F @Temperature 392 °F |
ASTM C351 | |
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | ASTM C177 |
| Melting Point | 343 °C | 649 °F | ASTM D3418 |
| Deflection Temperature at 1.8 MPa (264 psi) | 315 °C | 599 °F | Annealed; ASTM D648 |
| Glass Transition Temp, Tg | 147 °C | 297 °F | DSC |
| Flammability, UL94 | V-0 @Thickness 0.800 - 1.60 mm |
V-0 @Thickness 0.0315 - 0.0630 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 3.80e+17 ohm-cm | 3.80e+17 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.90e+17 ohm | >= 1.90e+17 ohm | ASTM D257 |
| Dielectric Constant | 3.49 @Frequency 1.00e+6 Hz |
3.49 @Frequency 1.00e+6 Hz |
ASTM D150 |
| 3.53 @Frequency 60.0 Hz |
3.53 @Frequency 60.0 Hz |
ASTM D150 | |
| 3.53 @Frequency 1000 Hz |
3.53 @Frequency 1000 Hz |
ASTM D150 | |
| Dielectric Strength | 16.0 kV/mm @Thickness 3.00 mm |
406 kV/in @Thickness 0.118 in |
ASTM D149 |
| Dissipation Factor | 0.0020 @Frequency 60.0 Hz |
0.0020 @Frequency 60.0 Hz |
ASTM D150 |
| 0.0020 @Frequency 1000 Hz |
0.0020 @Frequency 1000 Hz |
ASTM D150 | |
| 0.0040 @Frequency 1.00e+6 Hz |
0.0040 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 365 °C | 689 °F | |
| Middle Barrel Temperature | 371 °C | 700 °F | |
| Front Barrel Temperature | 377 °C | 711 °F | |
| Nozzle Temperature | 382 °C | 720 °F | |
| Mold Temperature | 177 - 204 °C | 351 - 399 °F | |
| Drying Temperature | 150 °C @Time 14400 sec |
302 °F @Time 4.00 hour |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | FAA FAR 25.853a; ISO 10993; ISO 10993-Part 1 | |
| Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| Latin America | ||
| North America | ||
| Color | Light Beige | |
| Form | Pellets | |
| Injection Rate | Fast | |
| Processing Technique | Injection Molding; Machining; Profile Extrusion | |
| RoHS Compliance | RoHS Compliant | |
| Screw Compression Ratio | 2.5:1.0 to 3.5:1.0 |
Users viewing this material also viewed the following:
- Performance Polymers IPS II PPL-C4270 PEKK (Polyetherketoneketone) Linear 40% Carbon Fiber Reinforced Molding Grade
- SABIC Innovative Plastics SABIC PPCOMPOUND 8620A PP
- Sharadaa Ceramics REFINSUL 8S Insulating Castables Medium/High Purity
- Silon Taborex TA 2126 HD Catalyst Masterbatch
- DuPont Performance Polymers Crastin® HR5330HF BK503 Polybutylene Terephthalate (PBT) (Unverified Data**)&
- California Fine Wire Nickel Alloy 180 Copper Nickel Resistance Wire
- Aremco Aremco-Seal™ 613 High Temperature Glass Coating
- Arkema Group Evatane® 1350 VN 5 Ethylene Vinyl Acetate
- Lucobit Lucofin® 1492 Chemically Modified Polyethylene
Copyright © lookpolymers.com All Rights Reserved