Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)

Category Polymer , Thermoplastic , Fluoropolymer , PVDF , Polyvinylidinefluoride (PVDF), Molded/Extruded
Manufacturer Solvay Specialty Polymers
Trade Name Solef®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Features: Copolymer; High ViscosityUses: PipingAdditional Properties: Crystallization Heat - ASTM D3417 42.0 to 50.0 J/g; Heat of Fusion - ASTM D3417 41.0 to 50.0 J/gInformation provided by Solvay Specialty Polymers.
Physical Properties Metric English Comments
Density 1.75 - 1.80 g/cc
0.0632 - 0.0650 lb/in³
ASTM D792
Water Absorption <= 0.040 %

@Time 86400 sec
 <= 0.040 %

@Time 24.0 hour
 ISO 62
Linear Mold Shrinkage, Flow 0.020 - 0.030 cm/cm
0.020 - 0.030 in/in
Melt Flow 2.5 - 4.0 g/10 min

@Load 10.0 kg,
Temperature 230 °C
 2.5 - 4.0 g/10 min

@Load 22.0 lb,
Temperature 446 °F
 ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Shore D 70
70
ASTM D2240
Tensile Strength at Break 34.0 - 40.0 MPa

@Thickness 2.00 mm
 4930 - 5800 psi

@Thickness 0.0787 in
 50 mm/min; ASTM D638
Tensile Strength, Yield 34.0 - 40.0 MPa

@Thickness 2.00 mm
 4930 - 5800 psi

@Thickness 0.0787 in
 50 mm/min; ASTM D638
Elongation at Break 100 - 300 %
100 - 300 %
50 mm/min; ASTM D638
Elongation at Yield 9.0 - 12 %
9.0 - 12 %
50 mm/min; ASTM D638
Tensile Modulus 1.25 - 1.40 GPa

@Thickness 2.00 mm
 181 - 203 ksi

@Thickness 0.0787 in
 1.0 mm/min; ASTM D638
Izod Impact, Notched 10.0 J/cm

@Thickness 4.00 mm
 18.7 ft-lb/in

@Thickness 0.157 in
 ASTM D256
Coefficient of Friction 0.20 - 0.40
0.20 - 0.40
vs. Itself; ASTM D1894
Coefficient of Friction, Dynamic 0.20 - 0.30
0.20 - 0.30
vs. Itself; ASTM D1894
Taber Abrasion, mg/1000 Cycles 5.0 - 10
5.0 - 10
CS-10 Wheel, 1000 g; ASTM D1044
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 130 - 180 µm/m-°C

@Temperature 0.000 - 40.0 °C
 72.2 - 100 µin/in-°F

@Temperature 32.0 - 104 °F
 1
Specific Heat Capacity 1.20 J/g-°C

@Temperature 23.0 °C
 0.287 BTU/lb-°F

@Temperature 73.4 °F
 ASTM C351
1.60 J/g-°C

@Temperature 100 °C
 0.382 BTU/lb-°F

@Temperature 212 °F
 ASTM C351
Thermal Conductivity 0.200 W/m-K

@Temperature 23.0 °C
 1.39 BTU-in/hr-ft²-°F

@Temperature 73.4 °F
 ASTM C177
Melting Point 170 - 174 °C
338 - 345 °F
DSC
Crystallization Temperature 142 - 146 °C
288 - 295 °F
Peak; ASTM D3418
Vicat Softening Point 167 °C
333 °F
Rate A (50°C/h), Loading 2 (50 N)
Glass Transition Temp, Tg -40.0 °C
-40.0 °F
ASTM E1356
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+14 ohm-cm
>= 1.00e+14 ohm-cm
ASTM D257
Surface Resistance >= 1.00e+14 ohm
>= 1.00e+14 ohm
ASTM D257
Descriptive Properties Value Comments
Availability Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved