- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Phenolic, Novolac, Mineral/Fiber Filled
- Sumitomo Bakelite Durez® 156 Phenolic, Injection Grade
Sumitomo Bakelite Durez® 156 Phenolic, Injection Grade
| Category | Polymer , Thermoset , Phenolic , Phenolic, Novolac, Mineral/Fiber Filled |
| Manufacturer | Sumitomo Bakelite High Peformance Plastics |
| Trade Name | Durez® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sumitomo Bakelite Durez® 156 Phenolic, Injection Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Durez 156 Black Phenolic is a two-stage, asbestos-free, heat resistant/electrical molding material. It exhibits excellent dimensional stability, high heat resistance, good molded appearance, and UL flammability rating. Typical applications include automotive carburetor spacers, sealing rings, thrust washers, speedometer sleeves, appliance terminals, probe controls, insulators, light baffles, etc.Durez 156 is fungus resistant per Mil-E-5272C.Information provided by Sumitomo Bak North America, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.54 g/cc | 0.0556 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.650 g/cc | 0.0235 lb/in³ | ASTM D1895 |
| Water Absorption | 0.30 % | 0.30 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0080 cm/cm | 0.0080 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 52.0 MPa | 7540 psi | ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1490 ksi | ASTM D638 |
| Flexural Strength | 83.0 MPa | 12000 psi | |
| Compressive Strength | 194 MPa | 28100 psi | ASTM D695 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL temperature Index |
| Deflection Temperature at 1.8 MPa (264 psi) | 191 °C | 376 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 0.500 mm |
V-1 @Thickness 0.0197 in |
|
| V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 5.5 @Frequency 1e+6 Hz |
5.5 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in | Step by step; ASTM D149 |
| 13.8 kV/mm | 351 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.050 @Frequency 1e+6 Hz |
0.050 @Frequency 1e+6 Hz |
ASTM D150 |
| Arc Resistance | 180 sec | 180 sec | ASTM D495 |
| Comparative Tracking Index | 180 V | 180 V | IEC Tracking Index |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P3930CT TPE, PP Overmold or Standalone use
- NCMT NanoPAC™ N10 High Performance Polypropylene Nanocomposite
- Kennametal Stellite Stellite® 712 Cobalt Alloy
- Solvay TECHNYL® A 218 V40 Black 21 NHFE PA66, 40% glass fiber, DRY
- Süd-Chemie Nanofil® SE 3000 Flame Retardant
- SMAC SMACFOAM® 1250S-02 Damping Material
- Tisan TISLAMID® 6 25% Glass Fiber Reinforced Flame Retardant (V0). Heat Stabilized Nylon 6
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 2.0 PHR MBT
- Domo Domamid® 24 T-HS Polyamide 6
Copyright © lookpolymers.com All Rights Reserved