- HOME
- POLYMER SEARCH
- Thermoplastic
- Polystyrene (PS)
- Polystyrene, Flame Retardant
- Supreme Petrochem SP 562 Flame Retardant Polystyrene
Supreme Petrochem SP 562 Flame Retardant Polystyrene
| Category | Polymer , Thermoplastic , Polystyrene (PS) , Polystyrene, Flame Retardant |
| Manufacturer | Supreme Petrochem LTD |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Supreme Petrochem SP 562 Flame Retardant Polystyrene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Characteristics Very good flow properties Free of DBDPO, PBDE & TBBA, complies with ROHS directive of EU Low specific gravity Processing Injection moldingApplications Large size T.V. Cabinets Audio cabinets Electrical boxes, electrical appliance parts Electrical distribution components, fuse carriers, enclosures etc.Material Status: Commercial : ActiveAgency Ratings: Information provided by Supreme Petrochem LTD
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.07 g/cc | 1.07 g/cc | ASTM D792 |
| Melt Flow | 8.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
8.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 28.4 MPa | 4120 psi | 50 mm/min; ASTM D638 |
| Elongation at Break | 35 % | 35 % | 50 mm/min; ASTM D638 |
| Flexural Strength | 37.3 MPa @Thickness 3.20 mm |
5410 psi @Thickness 0.126 in |
ASTM D790 |
| Flexural Modulus | 2.06 GPa @Thickness 3.20 mm |
299 ksi @Thickness 0.126 in |
ASTM D790 |
| Izod Impact, Notched | 1.10 J/cm @Thickness 3.20 mm |
2.06 ft-lb/in @Thickness 0.126 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Hot Ball Pressure Test | 78.0 °C | 172 °F | IEC335-1 |
| Deflection Temperature at 1.8 MPa (264 psi) | 81.0 °C | 178 °F | ASTM D648 |
| Vicat Softening Point | 97.0 °C | 207 °F | 1kg / 120°C; ASTM D1525 |
| Flammability, UL94 | V-2 @Thickness 1.60 mm |
V-2 @Thickness 0.0630 in |
|
| Glow Wire Test | 650 °C | 1200 °F | IEC 695-2-1 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+16 ohm-cm | >= 1.00e+16 ohm-cm | IEC 93 |
| Surface Resistance | >= 1.00e+14 ohm | >= 1.00e+14 ohm | IEC 93 |
| Dielectric Constant | 2.6 @Frequency 1e+6 Hz |
2.6 @Frequency 1e+6 Hz |
IEC 250 |
| Dissipation Factor | 0.00040 @Frequency 1e+6 Hz |
0.00040 @Frequency 1e+6 Hz |
IEC 250 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | <= 250 °C | <= 482 °F | |
| Mold Temperature | 40.0 - 60.0 °C | 104 - 140 °F | |
| Drying Temperature | 60.0 - 80.0 °C | 140 - 176 °F | ( 2 hrs) Pre drying temp. |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CP - 86 General Purpose Acrylic Resin
- Ineos ABS Lustran® QE 1120, Extrusion Grade (discontinued **)
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR Mistron Vapor Filler
- Petroquimica Triunfo Trithene® TU 3001 LDPE - Agricultural Film
- Solvay GERONOL® FF/4-E Surfactant
- A. Schulman POLYBATCH™ Green 30424 Concentrate Based In Polyethylene
- Covestro Makrofol® BL 6-2 820802 Polycarbonate
- Asahi Kasei Thermofil P-40TC-1156 40% Talc Reinforced, Heat Stabilized
- Aaron Industries AAROPRENE® AEN 6600-3 Nylon 6/6 Engineered Resin
- Hexcel® HexForce™ 1543 Fiber Glass Fabric
Copyright © lookpolymers.com All Rights Reserved