Wolf Kunststoff ZEDEX® ZX-530KF15 A5M Polymer Alloy

Category	Polymer , Thermoplastic
Manufacturer	Wolf Kunststoff
Trade Name	ZEDEX®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Wolf Kunststoff ZEDEX® ZX-530KF15 A5M Polymer Alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Main Characteristics: High elongation; High impact strength; Stress resistantApplications: Chemical Engineering; Laboratory Technology; Automitve Technology; Machine ToolsInformation provided by Zedex

Physical Properties	Metric	English	Comments
Density	1.30 g/cc	0.0470 lb/in³	ISO 1183
Water Absorption	0.010 % @Temperature 23.0 °C	0.010 % @Temperature 73.4 °F	RMC 93%; DIN EN ISO 62
Moisture Absorption at Equilibrium	0.050 %	0.050 %	DIN EN ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	>= 100	>= 100	DIN 53505
Hardness, Shore D	81	81	DIN 53505
Ball Indentation Hardness	107 MPa	15500 psi	DIN 2039
Tensile Strength at Break	50.0 MPa	7250 psi	DIN EN ISO 527
Tensile Strength	50.0 MPa	7250 psi	DIN EN ISO 527
Tensile Stress	14.0 MPa @Strain 1.00 %, Time 3.60e+6 sec	2030 psi @Strain 1.00 %, Time 1000 hour	DIN 53444
Tensile Strength, Yield	38.0 MPa	5510 psi	Elastic Limit
Elongation at Break	19.9 %	19.9 %
	19.9 %	19.9 %	DIN EN ISO 527
Elongation at Yield	3.4 %	3.4 %	Elastic Yield Point
	5.6 %	5.6 %	Flexural; DIN EN ISO 178
	19.9 %	19.9 %	Elongation at Maximum Force; DIN EN ISO 527
Tensile Modulus	1.50 GPa	218 ksi	DIN EN ISO 527
Flexural Strength	63.0 MPa	9140 psi	Outer Fiber Stress at 3.5% Outer Fiber Strain; DIN EN ISO 178
	70.0 MPa	10200 psi	DIN EN ISO 178
Flexural Modulus	2.32 GPa	336 ksi	DIN EN ISO 178
Compressive Strength	50.4 MPa	7310 psi	Elastic Limit
	19.0 MPa @Time 3.60e+7 sec	2760 psi @Time 10000 hour
	43.0 MPa @Time 360000 sec	6240 psi @Time 100 hour
	54.0 MPa @Time 36.0 sec	7830 psi @Time 0.0100 hour
	40.5 MPa @Strain 3.50 %	5870 psi @Strain 3.50 %	DIN EN ISO 604
Compressive Modulus	1.748 GPa	253.5 ksi	DIN EN ISO 604
Fatigue Strength	6.00 MPa @# of Cycles 1.00e+6	870 psi @# of Cycles 1.00e+6	1 Hz
K Factor (ISO)	0.30 µm/km @Temperature 20.0 °C	0.30 µm/km @Temperature 68.0 °F
	1.0 µm/km @Temperature 100 °C	1.0 µm/km @Temperature 212 °F
Charpy Impact Unnotched	NB	NB	EN ISO 179/1eU
Charpy Impact, Notched	2.35 J/cm²	11.2 ft-lb/in²	EN ISO 179/1eA
Coefficient of Friction, Dynamic	0.080 @Temperature 100 °C	0.080 @Temperature 212 °F	Dry Operation
	0.13 @Temperature 20.0 °C	0.13 @Temperature 68.0 °F	Dry Operation
Coefficient of Friction, Static	0.21 @Temperature 20.0 °C	0.21 @Temperature 68.0 °F	Dry Operation
Tensile Creep Modulus, 1000 hours	1300 MPa	189000 psi	At 1% Deformation; DIN 53444
Limiting Pressure Velocity	0.150 MPa-m/sec	4280 psi-ft/min	v = 100m/min
	0.16667 MPa-m/sec	4758.4 psi-ft/min	v = 200m/min
	0.35583 MPa-m/sec	10159 psi-ft/min	v = 1m/min
	0.96666 MPa-m/sec	27598 psi-ft/min	v = 10m/min
Compression Set	4.5 %	4.5 %	Elastic Compression Limit

Thermal Properties	Metric	English	Comments
CTE, linear	60.0 µm/m-°C @Temperature <=100 °C	33.3 µin/in-°F @Temperature <=212 °F	ISO E 830
	67.0 µm/m-°C @Temperature <=150 °C	37.2 µin/in-°F @Temperature <=302 °F	ISO E 831
Specific Heat Capacity	1.81 J/g-°C	0.433 BTU/lb-°F	DSC
Melting Point	320 °C	608 °F	DSC
Maximum Service Temperature, Air	70.0 °C	158 °F	Pressed Bushings
	160 °C	320 °F	Short Term (3h)
	170 °C	338 °F	Continuous
Deflection Temperature at 1.8 MPa (264 psi)	117 °C	243 °F	DIN EN ISO 75
Glass Transition Temp, Tg	90.0 °C	194 °F	DSC

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 93
Surface Resistance	6.50e+12 ohm	6.50e+12 ohm	IEC 93
Dielectric Constant	4.1 @Frequency 110 Hz	4.1 @Frequency 110 Hz	IEC 250
Dielectric Strength	21.5 kV/mm	546 kV/in	IEC 243
Dissipation Factor	0.030	0.030	IEC 112
	0.11 @Frequency 1.00 Hz	0.11 @Frequency 1.00 Hz
Comparative Tracking Index	130 V	130 V	IEC 112

Descriptive Properties	Value	Comments
Alignment Adjustment	5	Nominal Scale: 1, low; 10, high
Chemical Sterilization	10	Nominal Scale: 1, low; 10, high
Color	Beige
Creep Resistance	2	Nominal Scale: 1, low; 10, high
Dimensional Stability with Thermal Expansion	5	Nominal Scale: 1, low; 10, high
FDA Compliant	Applicable
Free from Silicon	Applicable
Gamma-rays Radiation Sterilization	4	Nominal Scale: 1, low; 10, high
Injection Molded Parts	Applicable
Machined Parts	Applicable
Moist Heat Sterilization	7	Nominal Scale: 1, low; 10, high
Plastic Granules	Applicable
Resistance Against dust, Dirt, Abrasive Substances	7	Nominal Scale: 1, low; 10, high
Resistance Against Hot Water	140
Resistance to Chemicals	5	Nominal Scale: 1, low; 10, high
Resistant Against Disinfectant	Applicable
Rods up to Øe (de)	Applicable
Sheets up to Maximum Thickness	Applicable
Sliding Velocity	50
Suitable for Outdoor Use	7	Nominal Scale: 1, low; 10, high
Suitable for Vacuum	Applicable
Tubes (hollow rods) up to Øe (de)	Applicable
UV Rays Resistance	8	Nominal Scale: 1, low; 10, high
UV-Sterilization	7	Nominal Scale: 1, low; 10, high

Users viewing this material also viewed the following: