POLYMER SEARCH

Zhejiang Juner 201-G20 20% Glass Fibre Reinforced

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT)
Manufacturer	Zhejiang Juner New Materials Co.
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zhejiang Juner 201-G20 20% Glass Fibre Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, Frameworks of Deflection Coils, Hi-Pressure Outputs Package, Plugs of Kinescopes Autos and Others: Ignition Systems, Heating Systems, Electricity Distribution Systems, Tail Lights Base, Shells of Ignition Coils, Door Handles, Air-Condition LatticesInformation provided by Zhejiang Juner New Materials Co, Ltd.

Physical Properties	Metric	English	Comments
Density	1.45 g/cc	0.0524 lb/in³	D792
Water Absorption	0.10 %	0.10 %	23°C•24h; D570
Linear Mold Shrinkage	0.0040 - 0.0080 cm/cm	0.0040 - 0.0080 in/in	D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	100 MPa	14500 psi	D638
Elongation at Break	4.0 %	4.0 %	D638
Flexural Strength	170 MPa	24700 psi	D790
Flexural Modulus	6.00 GPa	870 ksi	D790
Charpy Impact Unnotched	4.20 J/cm²	20.0 ft-lb/in²	IS0179
Charpy Impact, Notched	0.900 J/cm²	4.28 ft-lb/in²	IS0179

Thermal Properties	Metric	English	Comments
CTE, linear	35.0 µm/m-°C @Temperature -30.0 - 30.0 °C	19.4 µin/in-°F @Temperature -22.0 - 86.0 °F	D696
Deflection Temperature at 1.8 MPa (264 psi)	202 °C	396 °F	D648
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	D257
Dielectric Constant	3.0 @Frequency 1e+6 Hz	3.0 @Frequency 1e+6 Hz	D150
Dielectric Strength	20.0 kV/mm	508 kV/in	D149
Dissipation Factor	0.025 @Frequency 1e+6 Hz	0.025 @Frequency 1e+6 Hz	D150

Processing Properties	Metric	English	Comments
Processing Temperature	255 - 265 °C	491 - 509 °F
Nozzle Temperature	245 °C	473 °F
Mold Temperature	40.0 - 80.0 °C	104 - 176 °F
Drying Temperature	130 - 140 °C @Time 14400 sec	266 - 284 °F @Time 4.00 hour
Injection Pressure	80.0 - 120 MPa	11600 - 17400 psi	3-15 sec
Back Pressure	8.00 - 18.0 MPa	1160 - 2610 psi

Users viewing this material also viewed the following: