Polymer Property : Density = 0.0180 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/in³	Density range normally used
Polimeri Europa Extir® A 2000 AE Expandable Polystyrene, Standard Flame Retardant Particle size range is 0.4 - 75 mm. Minimum apparent density on a discontinuous pre-expander is 17 g/l.Processing technology used for Type A 2000 AE is: Molding, Traditional and Vacuum.Specific cha..
Density	0.0180 - 0.0350 g/cc	0.000650 - 0.00126 lb/in³	Density range normally used
Polimeri Europa Extir® B 3000 AE Expandable Polystyrene, Fast Molding Flame Retardant Particle size range is 0.7 - 1 mm. Minimum apparent density on a discontinuous pre-expander is 17 g/l.Processing technology used for Type B 3000 AE is: Molding, Vacuum.Specific characteristics: DIN..
Density	>= 0.0180 g/cc	>= 0.000650 lb/in³	Minimum apparent density on a continuous pre-expander after one expansion
Polimeri Europa Extir® CM Galileo Europa 5 Expandable Polystyrene - Continuous Mass Product Description:Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of ..
Density	0.0180 - 0.0350 g/cc	0.000650 - 0.00126 lb/in³	Normal range, one pre-expansion
SABIC EPS 452 Expandable Polystyrene Product Description: Standard expanded Polystyrene EPS 452 is manufactured by the suspension polymerization of styrene monomer. The polymerization is generally carried out in a batch process. EPS..
Density	0.0180 - 0.0400 g/cc	0.000650 - 0.00145 lb/in³	Usual Use
NOVA Chemicals Gedexcel® 45B Expandable Polystyrene Styrene homopolymer containing pentane, used as a blowing agent. Fast molding cycle product allowing to obtain optimum mechanical properties for form molding of very thin parts (5 mm to 20 mm).Infor..
Density	0.0180 - 0.0400 g/cc	0.000650 - 0.00145 lb/in³	Usual Use
NOVA Chemicals Gedexcel® 45XA Expandable Polystyrene Styrene homopolymer containing pentane, used as a blowing agent with an additive improving its reaction to fire. Fast molding cycle product allowing to obtain optimum mechanical properties for from ..
Density	>= 0.0180 g/cc	>= 0.000650 lb/in³	Minimum apparent density on a continuous pre-expander after one expansion
Polimeri Europa Extir® CM Galileo Io 5 AE Expandable Polystyrene - Continuous Mass Product Description:Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of ..
Density	>= 0.0180 g/cc	>= 0.000650 lb/in³	Minimum apparent density on a continuous pre-expander after one expansion
Polimeri Europa Extir® CM Galileo Io 5 Expandable Polystyrene - Continuous Mass Product Description:Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of ..
Density	>= 0.0180 g/cc	>= 0.000650 lb/in³	Minimum apparent density on a continuous pre-expander after one expansion
Polimeri Europa Extir® CM Giotto 5 Expandable Polystyrene - Continuous Mass Product Description:Extir CM is the new expandable products range produced with the new Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of ..
Density	0.0180 - 0.0350 g/cc	0.000650 - 0.00126 lb/in³
Polimeri Europa Extir Leonardo B 3000 AE Expandable Polystyrene  (discontinued **) Extir B 3000 AE is a flame retardant expandable polystyrene in the form of spherical beads of medium particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. This grad..
Density	0.0180 - 0.0350 g/cc	0.000650 - 0.00126 lb/in³	Density range normally used
Polimeri Europa Extir® B 3000 Expandable Polystyrene, Fast Molding  (discontinued **) Particle size range is 0.7 - 1 mm. Minimum apparent density on a discontinuous pre-expander is 17 g/l.Processing technology used for Type B 3000 is: Molding, Vacuum.Specific characteristics: Good m..
Density	>= 0.0180 g/cc	>= 0.000650 lb/inÂ³	Minimum achievable; Single stage pre-expansion in continuous expander at atmospheric pressure
Ineos Nova StyrocellÂ® M544C Expandable Polystyrene A high strength, fast cycling regular molding grade consisting of spherical polystyrene beads containing pentane as expansion agent, typically used for medium density foam.Applications: Styrocell is..
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/inÂ³	Normal molded density assuming cost optimized selection of processing conditions.
Ineos Nova StyrocellÂ® M544C Expandable Polystyrene A high strength, fast cycling regular molding grade consisting of spherical polystyrene beads containing pentane as expansion agent, typically used for medium density foam.Applications: Styrocell is..
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/inÂ³	Final Product Density
Iran Petrochemical (PCC) TPC - 323 FC Expandable Polystyrene TPC - 323 FCApplications: faster cycling shape molding with wall thickness >10mm, medium to high density blocksInformation provided by Iran Petrochemical Commercial Co.
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/inÂ³	molding density range
IRPC Polimaxx Pentfoam 355E Expandable Polystyrene GENERAL: PENTFOAM "355E" IS A SELF EXTINGUISHING (SE) GRADE EXPANDABLE POLYSTYRENE (EPS) CONTAINING PENTANE AS BLOWING AGENT. THIS GRADE IS DEVELOPED TO MEET THE DEMAND FOR FAST EXPANSION RATE AND S..
Density	0.0180 g/cc	0.000650 lb/inÂ³	1 minute residence time
Jackon JACKOCELLÂ® S3312 Expanded Polystyrene Packaging and Shape Molding 100% Polystyrene.Pre-expansionA substantial reduced pentane emission has been made possible with JackocellÂ® S3312 - which will lead the industry into the future. High stability of pre-expanded be..
Density	0.0180 g/cc	0.000650 lb/in³	Nominal skin/skin; BS ISO 7214 1998
Zotefoams Plastazote® LD18 Low Density Polyethylene Foam Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Density	0.0180 - 0.0240 g/cc	0.000650 - 0.000867 lb/in³	sheet density
Zotefoams Plastazote® LD18 Low Density Polyethylene Foam Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Density	0.0180 - 0.0240 g/cc	0.000650 - 0.000867 lb/in³	sheet density
Zotefoams Plastazote® LD18SC Low Density Polyethylene Foam, Small Cell Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
Density	0.0180 - 0.800 g/cc	0.000650 - 0.0289 lb/in³
BASF Styropor® BFL 327 EPS Description: Modified expandable polystyrene (EPS) containing approximately 3.75 – 3.95 wt% pentane as the blowing agent. Styropor BFL products are compatible with many anti-stat, mineral oil and c..
Density	0.0180 - 0.0650 g/cc	0.000650 - 0.00235 lb/in³
BASF Styropor® BFL 422 EPS Description: Modified expandable polystyrene (EPS) containing approximately 3.75 – 3.95 wt% pentane as the blowing agent. Styropor BFL products are compatible with many anti-stat, mineral oil and c..
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/in³	Final Product Density
Iran Petrochemical (PCC) TPC - 321 HS Expandable Polystyrene TPC - 321 HSApplications: shape molding with wall thickness > 10 mm, medium to high density blocksInformation provided by Iran Petrochemical Commercial Co.
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/in³	Final Product Density
Iran Petrochemical (PCC) TPC - 326 WP Expandable Polystyrene TPC - 326 WPApplications: low water absorption, longer cycling shape molding with wall thickness >10 mmInformation provided by Iran Petrochemical Commercial Co.
Density	0.0180 - 0.0200 g/cc	0.000650 - 0.000723 lb/in³
IRPC Polimaxx Pentfoam 522F Expandable Polystyrene GENERAL: PENTFOAM "522F" IS A REGULAR GRADE (STANDARD GRADE) EXPANDABLE POLYSTYRENE (EPS) CONTAINING PENTANE AS BLOWING AGENT. THIS GRADE IS DEVELOPED TO MEET THE DEMAND FOR FAST MOLDING CYCLES IN V..
Density	0.0180 - 0.0200 g/cc	0.000650 - 0.000723 lb/in³
IRPC Polimaxx Pentfoam 526W Expandable Polystyrene GENERAL: PENTFOAM "526W" IS A REGULAR GRADE (STANDARD GRADE) EXPANDABLE POLYSTYRENE (EPS) CONTAINING PENTANE AS BLOWING AGENT.APPLICATIONS: PENTFOAM "526W" IS PARTICULARLY WELL SUITED FOR THE MANUFA..
Density	0.0180 g/cc	0.000650 lb/in³	75 second cycle time
Jackon JACKOCELL® S314 Expanded Polystyrene Construction and Block Molding Pre-ExpansionThe unique design of polystyrene chains and additive chemistry in Jackocell® S314 gives pre-expanded beads high dimensional stability even at low densities, which typically reduces ave..
Density	0.0180 g/cc	0.000650 lb/in³	75 rpm
Jackon JACKOCELL® S314 Expanded Polystyrene Construction and Block Molding Pre-ExpansionThe unique design of polystyrene chains and additive chemistry in Jackocell® S314 gives pre-expanded beads high dimensional stability even at low densities, which typically reduces ave..
Density	0.0180 - 0.0300 g/cc	0.000650 - 0.00108 lb/in³
Polimeri Europa Extir Leonardo A 2000 AE Expandable Polystyrene  (discontinued **) Extir A 2000 AE is a flame retardant expandable polystyrene in the form of spherical beads of fine particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. Extir A 200..
Density	0.0180 - 0.0350 g/cc	0.000650 - 0.00126 lb/in³	Normal range, one pre-expansion
SABIC EPS 450FF Expandable Polystyrene Product Description: Fire retardant expanded Polystyrene EPS 450FF is manufactured by the suspension polymerization of styrene monomer. The polymerization is generally carried out in a batch proce..
Density	0.0180 - 0.0220 g/cc	0.000650 - 0.000795 lb/in³
IRPC Polimaxx Pentfoam 328H Expandable Polystyrene General: Pentfoam 328H is a high density grade expandable polystyrene containing pentane as blowing agent, this grade is developed to meet the demand for fast molding cycles in vacuum machineApplica..