Polymer Property : Density = 0.0347 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	0.960 g/cc	0.0347 lb/in³	ISO 1183
Quadrant EPP Cesticolor™ HD 500 Polyethylene Data provided by Quadrant Engineering Plastic Products for polymers in their European product line.
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
NOVA Chemicals Sclair® 2907 HDPE Injection Molding Resin Features: High stiffness, maximum impact strength and toughness, good top loading capability, high surface gloss.Applications: Protective sports equipment, safety helmets, high impact custom molding..
Density	0.960 g/cc	0.0347 lb/in³	TPE-0105 (ASTM D792)
Advanced Elastomer Systems Santoprene® 221-73 W175 Thermoplastic Rubber  (discontinued **) A colorable thermoplastic UV grade elastomer designed for thin wall extrusion applications with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and c..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D1505
Formosa Plastics Formolene® LH6008 Injection Molding HDPE  (discontinued **) HomopolymerApplications: Totes, cases, crates, over-caps, toysFormolene LH6008 is a high density polyethylene for injection molding applications.Meets all requirements of the U.S. Food and Drug Admi..
Density	0.960 - 1.34 g/cc	0.0347 - 0.0484 lb/in³	Average value: 1.07 g/cc Grade Count:42
Overview of materials for Polypropylene, Mineral Reinforced, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Mineral Reinforced, Impact Modified". Each property range of values reported is minimum a..
Density	0.961 g/cc	0.0347 lb/inÂ³	Calculated from weight of 36 oz/sy
Mid-Mountain Materials SILTEXÂ® 36 Amorphous Silica Textile Description: SILTEX is a family of high performance textile fabric that is comprised of high purity, high strength amorphous silica fibers, woven into a strong, flexible fabric designed for use wher..
Density	0.960 g/cc	0.0347 lb/inÂ³	ASTM D792
IRPC Polimaxx Polene GM2860 High Density Polyethylene CHARACTERISTICS: HIGH IMPACT STRENGTH, GOOD PROCESSABILITY, HIGH STIFFNESSAPPLICATIONS: BLOW MOLDING FOR CONTAINERS FROM A FEW ml TO ABOUT 20 LITRES, LUBRICANT BOTTLES COSMETIC BOTTLES, ONE-WAY BOTT..
Density	>= 0.960 g/cc	>= 0.0347 lb/inÂ³	ASTM D1505
LyondellBasell PetrotheneÂ® LM600700 High Density Polyethylene (Blow Molding Grade) ApplicationsPETROTHENE LM 6007-00 resin exhibits very low taste and odor characteristics as well as good rigidity. Typical applications include water, and milk and juice bottles.Regulatory StatusLM..
Density	0.960 g/cc	0.0347 lb/inÂ³	ASTM D792
Multibase Multi-Flamâ„¢ 2318 PP Polypropylene Features:Flame RetardantHalogen Content, Low to NoneBlooming, None Forms:PelletsProcessing Methods:Injection MoldingExtrusionCoextrusionUses:TubingPipingFurnitureInformation provided by Multibase
Density	0.960 g/cc @Temperature 25.0 Â°C	0.0347 lb/inÂ³ @Temperature 77.0 Â°F	Liquid
Solvay Specialty Polymers MeforexÂ® 32 Ozone-Friendly CFC Replacement Formula: CH2F2; Name: Difluoromethane. Replaces R 502, R22. Refrigerant blends component.Information provided by Solvay Solexis, Inc.
Density	0.960 g/cc	0.0347 lb/in³	ISO 1183
Borealis Daplen™ EE137AI Polypropylene Compound 10% Mineral Filled Daplen EE137AI is a 10% mineral filled grade intended for injection molding. EE137AI has been developed especially for the car industry, to be used in interior parts where high scratch resistance i..
Density	0.960 g/cc	0.0347 lb/in³	ISO 1183
Unipetrol PE HD LITEN® MB/ML 62 HDPE Made for injection molding applications.Information provided by Unipetrol RPA
Density	0.960 g/cc	0.0347 lb/in³	ASTM D1505
Chevron Phillips Marlex® K608 HDPE Extrusion Molding Resin Resin Type: Ethylene HomopolymerCharacteristics: Good ESCRExceptional RigidityExcellent melt strengthGood whiteness in unpigmented partsApplications: Table topsNursery containersDunnage traysLarge t..
Density	0.961 g/cc	0.0347 lb/in³	ASTM D4883
ExxonMobil HDPE HYA 800 High Density Polyethylene Resin Product Description: HYA 800 is a homopolymer HDPE grade, characterized by high stiffness, high rigidity and high flow.Availability: Africa & Middle East, Asia Pacific and Europe Additive: Thermal ..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
Diamond Polymers Softflex® SF 5596 Thermoplastic Elastomer Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Density	0.961 g/cc	0.0347 lb/in³
BNZ Materials Marinite® P High Temperature Structural Insulation Oven dried formulations of BNZ boards are used in a variety of heat insulating processes, fire protection and machined parts. Selection is commonly based on a balance between strength and insulating..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
Aclo Accutech Polypropylene Homopolymer HP0334C10L1 Calcium Reinforced
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
Aclo Accutech Polypropylene Homopolymer HP0334M10CL Mica Reinforced Coupled
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
Aclo Accutech Polypropylene Homopolymer HP0336W10L1 Wollastonite Reinforced
Density	0.960 g/cc	0.0347 lb/in³
BASF DiethylenetriaminE Formula: C4H13N3CAS: 111-40-0Description: Diethylenetriamine is a colorless to yellow liquid with an amine-like odor.Synonyms: DETA, Bis(2-aminoethyl)amine, 1,4,7-Triazaheptane, 1,5-Diamino-3-azapen..
Density	0.960 g/cc @Temperature 23.0 °C	0.0347 lb/in³ @Temperature 73.4 °F	ISO 1183
Arkema Group EVATANE® 33-15 Copolymer Ethylene - Vinyl Acetate EVATANE® 33-15 is a random copolymer of Ethylene and Vinyl Acetate made by high-pressure radicalar polymerisation process. EVATANE® 33-15 is stabilized with antioxidants. The High Vinyl Acetate co..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D1505
Bapolene® 3255 Polyethylene, Injection Grade Narrow molecular weight distribution injection molding resin. This resin offers good impact strength, resistance to warpage, and stiffness. This product meets the Food and Drug Administration requ..
Density	0.960 g/cc	0.0347 lb/in³	ISO 1183
CENTROPLAST CENTROLEN PE-HD Polyethylene high density This material is a low density, easily machined plastic that can be welded and has good chemical resistance. Applications include apparatus engineering, and machines in the foodstuff industry.Infor..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
Techmer ES Luriblend® HDPE GL5 Availability: North AmericaForms: PelletsAdditive: Graphite Powder LubricantInformation provided by TP Composites, Inc.
Density	0.960 g/cc	0.0347 lb/in³	w/o expancel
Akzo Nobel Injection molding of 20% Wood Plastic Composite with 3.25% Expancel 092-120
Density	0.960 g/cc	0.0347 lb/in³	ISO 1183
SABIC Innovative Plastics SABIC PPCOMPOUND 5310 PP SABIC® PPcompound 5310 is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and heat stability with exterior automotive weathering stability. The IMDS I..
Density	0.960 g/cc	0.0347 lb/in³	ASTM D792
NOVA Chemicals Sclair® 59D HDPE Blow Molding Resin  (discontinued **) Features: High impact resistance, good stiffness, moderate ESCR.Applications: Food packaging, small parts (HIC), oil bottles.Data provided by the manufacturer.